Give your rig a fresh look and restore full patio protection with Lippert's factory-quality replacement awning fabric. Part number V000334376 is engineered specifically for 14 ft awning assemblies and is cross-compatible with Solera, Dometic, and Carefree awning hardware -- so you can replace worn, faded, or torn fabric without replacing the entire awning arm assembly.
Lippert's Solera replacement fabric is constructed from 13.5-oz vinyl -- a weight class that balances UV resistance, tear strength, and packability for RV patio awnings. The Sand Fade colorway transitions from a warm sandy tone across the topside while the underside is finished in clean white, keeping your outdoor living space bright and comfortable on sunny days.
Every seam is heat-welded rather than stitched, eliminating needle holes that can wick water and lead to premature failure at high-stress points. Cold-crack testing down to -25F means the fabric stays pliable and intact even if you get caught by an early-season freeze or store the rig in a cold climate.
Bonded seams at every critical junction -- no needle holes, no stitching gaps -- for leak-resistant performance along the full 8 ft projection.
Vinyl formulation tested to -25F, so the fabric won't crack or stiffen during cold-weather storage or late-season camping.
Includes a poly cord sewn into the valance hem for optional aftermarket LED light strips or light tracks -- lights and track sold separately.
Bright white interior surface reflects light under the awning, improving visibility and comfort without glare from direct sun above.
This fabric is designed to drop into existing awning roller assemblies from the three most common RV awning brands on the market:
The 13'1" fabric width is the correct replacement for a 14 ft awning assembly. This is standard -- replacement fabric is always cut approximately 11 inches shorter than the stated awning size to account for the roller tube end caps and mounting hardware. If your awning assembly measures 14 ft rail-to-rail, this is the correct fabric width.
Always measure your existing fabric width (not the arm spread) before ordering. The fabric width on your current roller should read approximately 13'1" if your awning is a 14 ft unit. Do not order by arm spread alone -- the roller tube and end fittings consume roughly 11 inches of that dimension.
The fabric provides an 8 ft projection -- the distance the awning extends outward from the RV sidewall when fully deployed. This is the industry-standard depth for most 14 ft class patio awnings and provides adequate coverage for a standard slideout or entry door area.
Replacing awning fabric on a Solera, Dometic, or Carefree roller requires removing the roller tube from the awning arms, sliding the old fabric off the tube, and threading the new fabric's bolt rope into the roller extrusion. Two people are strongly recommended for safe handling of the roller and to keep the fabric clean during installation. A fabric tension tool or awning installation bar simplifies the process but is not required.
This replacement fabric is cut and manufactured to order. It cannot be returned or exchanged once the order is placed. Verify your awning size and current fabric width before submitting your order. Lippert strongly recommends measuring the existing fabric -- not the awning arm spread -- to confirm the correct width.