Compact white RV roof vent with 6" single-speed exhaust fan, built-in LED lighting, rain protection, and removable bug screens for bathrooms, galleys, and smaller ventilation spaces.
The Maxxair 00-03801 MaxxFan Mini Plus is designed for RV bathrooms, galleys, and smaller interior spaces where powered ventilation and lighting are both helpful. Its 6" single-speed exhaust fan helps move stale air, humidity, cooking odors, and bathroom moisture out of the RV.
This white Mini Vent Plus fits standard 14" x 14" RV roof openings and includes built-in LED lighting, a protective rain shield, and removable bug screens. The low-profile design helps provide everyday ventilation without requiring a separate exterior vent cover in many applications.
Single-speed powered fan helps remove odors, moisture, and stale air
Built-in LED lighting adds convenient illumination where the vent is installed
Integrated rain shield helps protect the interior from rain and debris
Removable screens help keep insects and debris out while allowing airflow
This roof vent is intended for standard 14" x 14" RV roof openings and commonly fits roofs from 1" to 4-1/2" thick. Always measure the existing roof opening and roof thickness before ordering. Installation may require compatible sealant, screws, wiring connections, and interior trim adjustment depending on the RV.
Before Starting: Work safely on the RV roof and disconnect power before wiring the fan or LED light. Use sealants and installation methods compatible with the RV roof material. Basic Installation Steps: 1. Confirm Fit: Measure the existing roof opening and roof thickness to confirm compatibility. 2. Remove Old Vent: Remove the existing roof vent, interior garnish, screws, and old sealant as needed. 3. Clean Roof Surface: Clean the mounting area so the new vent can seal properly against the roof. 4. Prepare Wiring: Confirm 12V DC power and ground wiring are available for the fan and light circuit. 5. Set Vent in Opening: Position the vent over the 14" x 14" opening and check alignment before fastening. 6. Seal and Fasten: Apply compatible RV roof sealant and secure the vent according to the installation instructions. 7. Connect Power: Make the 12V wiring connections using proper RV electrical practices. 8. Test Operation: Confirm fan operation, LED light function, lid movement, screen fit, and exterior seal.
Package Contents: • Maxxair 00-03801 MaxxFan Mini Plus roof vent assembly • Built-in 6" exhaust fan • Built-in LED light • White lid / cover assembly • Removable bug screens NOT Included — May Also Need: • RV roof sealant • Mounting screws or installation hardware, if not supplied or if replacements are needed • Interior garnish trim, depending on roof thickness and installation • Wire connectors or electrical supplies • Roof repair materials if the existing opening or seal area is damaged Check the RV roof opening, roof thickness, wiring, and sealant requirements before beginning installation.
To confirm compatibility before ordering, have the following ready: • Existing roof opening size • Roof thickness • Current vent brand/model, if replacing an existing unit • Whether 12V DC wiring is available at the vent location • Photos of the existing vent and interior garnish, if available Why this matters: RV roof vents often use a standard opening, but roof thickness, garnish depth, wiring access, and sealant condition can affect installation.
Match this roof vent by opening size, roof thickness, wiring availability, and intended ventilation needs. Always confirm measurements before installation.
If the fan or LED light does not operate after installation, verify 12V power, ground, polarity, fuse condition, and wiring connections before replacing parts.