Heavy-duty adjustable ball mount for 2-1/2" receivers with dual integrated 2" and 2-5/16" chrome-plated hitch balls. Adjustable from 7-1/2" drop to 7-1/2" rise via two stainless steel pins. Stowable — rotates under the hitch when not in use. Anti-theft locking design. 18,000 lb GTW / 1,800 lb TW.
The Fastway Flash Force takes the adjustable ball mount concept and solves three problems that standard adjustable mounts leave unaddressed: the hassle of switching between ball sizes, the annoyance of the mount sticking out dangerously when not in use, and the vulnerability to theft when the truck is parked unattended.
Two chrome-plated hitch balls — 2" and 2-5/16" — are permanently integrated into a rotating ball assembly. Switching between coupler sizes takes seconds: rotate the assembly, and the other ball is in position. No separate balls to lose, no wrenches needed. The adjustable shank slides up or down and is secured with two stainless steel pins, providing 7-1/2" of drop or 7-1/2" of rise from the 2-1/2" receiver — covering a wide range of lifted HD trucks and low-coupler trailer combinations. When towing is done, the entire mount rotates and stows beneath the receiver, eliminating the shin-catching hazard and protecting the tailgate from contact damage. And once the pins are in place, the anti-theft design prevents the arm from being removed without the pins — keeping the mount on the truck. Forged steel construction rated for 18,000 lb GTW and 1,800 lb tongue weight with corrosion-resistant finish.
2" and 2-5/16" chrome-plated balls built into a rotating assembly — switch coupler sizes in seconds without tools or separate balls
Wide adjustment range via two stainless steel pins — covers lifted HD trucks towing high-coupler and low-coupler trailers
Rotates beneath the receiver when not in use — no shin hazard, no tailgate damage. Pins prevent arm removal for anti-theft security
Forged steel construction with corrosion-resistant finish — rated for 18,000 lb gross trailer weight / 1,800 lb tongue weight on 2-1/2" receivers
The Flash Force's stowable feature is one of its most practical advantages for daily drivers: When towing: The shank is in the normal vertical position with the ball assembly facing up and forward — standard ball mount orientation. Two stainless steel pins lock it in place. When not towing: Remove the pins, rotate the entire mount 180° downward so it sits beneath the receiver opening, and replace the pins in the stowed position. The mount is now tucked safely out of the way — no shin-catching hazard, no tailgate contact, and the anti-theft pin-lock prevents the arm from being pulled out. Switching ball sizes: With the mount in the towing position, the ball assembly itself also rotates — swing it to put either the 2" or 2-5/16" ball in the upright towing position. Takes seconds without tools. This means the Flash Force can stay on the truck full-time without the safety hazards or tailgate damage risk of a standard fixed ball mount.
Receiver size — 2-1/2" only: The 67-00-7675 is sized for 2-1/2" receivers found on HD trucks and Class V applications. It will not fit correctly in a standard 2" receiver. For 2" receivers see the 2" Flash Force models. Confirm your required drop: This model provides up to 7-1/2" of drop (or 7-1/2" of rise when flipped). Measure from the inside top of your receiver to the desired ball height to confirm this range covers your specific truck-and-trailer combination before ordering. Not a weight distribution hitch: The Flash Force is a ball mount — it holds the hitch ball and connects the trailer coupler to the tow vehicle. It does not distribute weight or provide sway control. For heavy trailers where tongue weight causes the rear of the truck to sag, a weight distribution hitch system is the correct solution.
Initial Height Setup: 1. Determine Required Drop: Measure from the inside top of your 2-1/2" receiver to the desired ball height. This is your required drop (or rise). 2. Insert Shank into Receiver: Slide the Flash Force shank into the receiver at the correct height position 3. Secure with Pins: Insert both stainless steel adjustment pins through the shank at the selected height holes and secure with clips 4. Select Ball Size: Rotate the ball assembly so the correct ball (2" or 2-5/16") is in the upright towing position 5. To Stow: Remove pins, rotate mount downward beneath receiver, replace pins in stowed position Contact Fastway at fastwaytrailer.com/contact-us with setup questions.
In The Package: • (1) Flash Force Adjustable Ball Mount — 2-1/2" Receiver • Integrated 2" Chrome-Plated Hitch Ball • Integrated 2-5/16" Chrome-Plated Hitch Ball • (2) Stainless Steel Adjustment Pins with Clips Recommended Accessory: • Fastway 86-00-3160 — Locking Hitch Pin for 2-1/2" receivers (secures the ball mount shank in the receiver)
Fastway Trailer Products: Website: fastwaytrailer.com/contact-us Fastway is a brand of Progress Mfg. Inc.
All Flash Force models share the same dual-ball, stowable, anti-theft, forged steel design. Select by receiver size and required drop/rise.