3-3/4" EPDM rubber wiper with integral track, ball tip, and Peel-N-Stick skirting. 60 ft roll. Companion bulb channel seal clips onto the built-in track. Known fitment: Evergreen Bayhill. Also known as 70-3835-265.
The Steele Rubber Products 90-3390-265 is a 3-3/4" Peel-N-Stick Wiper with Track ā an EPDM rubber wiper weatherstrip found on many RV slide-outs that creates a dynamic seal keeping weather, moisture, insects, and foreign elements out of the coach. What sets this profile apart from standard flat blade wipers is its integral built-in track: a companion bulb weatherstrip with channel clips directly onto this track to complete the slide-out seal system, giving the wiper and bulb a unified, two-component installation.
The 70-3835-265 profile features a ball tip wiper at the blade's leading edge for improved wiping action and reliable wiper flip as the slide-out moves in and out. The exclusive Peel-N-Stick skirting design surrounds the adhesive tape edges for a clean, finished look with no unsightly gaps, protects the adhesive from debris and moisture, and ensures a long-lasting bond to the RV frame surface. Manufactured from top-quality EPDM rubber for durability, wear resistance, and a proper seal.
Known to fit the Evergreen Bayhill fifth wheel and found on many other RV slide-outs. The companion bulb weatherstrip with channel is sold separately. The 60-foot roll provides generous coverage for full perimeter replacement, multi-side applications, or larger coach configurations.
Built-in track accepts a companion bulb channel seal ā wiper and bulb function together as a unified two-component system
Ball tip at the blade edge improves wiping action and ensures reliable wiper flip during slide-out extension and retraction
Exclusive skirting surrounds adhesive edges ā clean finished appearance, debris protection, and long-lasting bond grip
Top-quality EPDM rubber ā superior wear and weather resistance, will not fade, shrink, or crack
This wiper seal includes a built-in track, but a companion bulb weatherstrip with channel is required to complete the slide-out seal system and is sold separately. The bulb's rigid channel section clips onto the track on this wiper and compresses against the RV body when the slide-out is closed. Confirm you have or are ordering the correct companion bulb channel seal before purchasing this wiper. Installation Temperature: Apply between 60Ā°F and 104Ā°F (15Ā°Cā40Ā°C) for best adhesive bond strength. The temperature difference between the seal and the bonding surface should be as small as possible. Completely remove all old seal material, adhesive residue, dirt, wax, and moisture before applying, and wipe with isopropyl alcohol to ensure a clean, dry surface.
Primary Part Number: 90-3390-265 Also Known As: 70-3835-265 Available Lengths (Same Profile): ā¢ 15 ft ā Part 90-3388-265 ā¢ 30 ft ā Part 90-3389-265 ā¢ 60 ft ā Part 90-3390-265 (This Item) ā¢ Also available by the foot for custom lengths Related Track Wiper Sizes: ā¢ Small ā Part 70-3884-265 (2-5/8" W) ā¢ Medium ā Part 70-3883-265 (2-7/8" W) ā¢ Large ā Part 70-3835-265 / 90-3390-265 (3-3/4" W, This Item) Note: Companion bulb weatherstrip with channel is required and sold separately.
What You Need: No hardware required for wiper. Recommended supplies: isopropyl alcohol or adhesive remover, clean cloth, tape measure, scissors or utility knife. Basic Installation Steps: 1. Check Temperature: Confirm ambient temp is between 60Ā°F and 104Ā°F (15Ā°Cā40Ā°C) ā match surface and seal temperature as closely as possible 2. Prep the Surface: Remove all old seal material, adhesive residue, dirt, wax, and moisture completely from the RV frame 3. Clean & Dry: Wipe with isopropyl alcohol and allow to fully dry 4. Measure & Cut: Cut wiper to required length with scissors or a sharp utility knife 5. Peel & Press: Remove the skirted adhesive backing and press the seal firmly onto the frame, working from one end to the other 6. Attach Companion Bulb Seal: Slide the channel on the separately purchased bulb weatherstrip onto the built-in track on this wiper 7. Test the Slide: Extend and retract to confirm the ball tip wiper flips correctly, the bulb channel seats securely on the track, and the adhesive bond holds
Included: ā¢ One (1) 90-3390-265 Peel-N-Stick Wiper Seal with Track ā¢ 60-foot pre-cut roll ā¢ Peel-N-Stick adhesive with protective skirting ā¢ EPDM rubber with ball tip wiper and integral track NOT Included: ā¢ Companion bulb weatherstrip with channel (sold separately ā required for complete system) ā¢ Isopropyl alcohol or adhesive remover for surface prep ā¢ Clean cloth, tape measure, scissors or utility knife
All three lengths share the same 3-3/4" wiper profile, EPDM rubber construction, ball tip wiper, integral track, and Peel-N-Stick skirting. Also available by the foot for custom lengths. Order the length that best matches your project to minimize waste.