Overview

The Valterra P25201 HydroMAX™ delivers steady, on-demand water for RV fixtures with automatic start/stop via its internal pressure switch. It ships ready to install with a clear bowl inlet strainer and your choice of plumbing: connect directly to the pump’s 1/2" female NPT ports or thread in the included 1/2" hose-barb adapters. Mount in any orientation; the compact polypropylene body and thermal overload safeguard long service life.

Key Features

• 3.0 GPM • 55 PSI performance for most single-bath RVs.
• Internal pressure switch: true automatic demand operation.
• Self-priming design for quick startup.
• Any-orientation mounting (horizontal/vertical/panel).
• Thermal overload protection for motor safety.
• Includes clear inlet strainer to protect valves/diaphragms.
• Plumbing flexibility: 1/2" FNPT ports + two 1/2" hose-barb adapters.
• Great Shurflo 2088 replacement (similar footprint/flow).

What’s in the Box

• HydroMAX™ pump P25201 (internal pressure switch)
• Clear bowl inlet strainer (thread-on)
• (2) 1/2" barb adapters for hose hookup
• 12V wiring leads

Install & Setup Tips

1. Use the included strainer on the inlet; keep suction runs short/airtight.
2. Choose plumbing: go direct FNPT or thread in the barb adapters.
3. Add flex hose on both sides to cut noise; mount on rubber isolators.
4. Fuse the 12V feed per pump draw; verify solid ground.
5. Open a faucet and power the pump to prime; it will shut off at pressure.

Technical Specifications

Recommended Add-Ons

• IRVWPC2 Intelligent RV Water Pump Controller – soft-start, anti-short-cycle logic, and dry-run protection for quieter, smarter operation.
• Accumulator tank – smooths pulses and further reduces cycling/noise.
• Anti-vibration flex hose kit – isolates pump noise from coach structure.

FAQs