Residential-style safety rail mounts to your RV wall beside the entry steps. 54" of continuous rail surface extends 42.5" from the wall. Magnetic lock holds rail secure during travel. For flat fiberglass-walled 5th wheels and travel trailers.
RV entry steps are one of the most common locations for slips, trips, and falls — especially in wet conditions, at night, or for anyone with reduced mobility or balance. The MORryde SP56-469 Safe-T-Rail brings residential-style handrail safety to your fifth wheel or travel trailer entry, giving you a secure, continuous grip surface from the top step all the way down to the bottom.
The Safe-T-Rail mounts to your RV's flat fiberglass wall and features a telescoping design that extends 42.5" out from the wall, providing 54" of continuous grippable rail surface alongside your steps. When it's time to travel, the rail folds back flush against the wall and a built-in magnetic lock holds it securely in place — no rattling, no manual latching, no forgetting to stow it. Quick to install, easy to use at every campsite, and designed specifically for the RV entry experience.
Provides an uninterrupted 54" of grippable handrail alongside the entry steps — from top to bottom in one continuous reach
Telescoping design reaches 42.5" out from the RV wall to position the rail comfortably alongside the steps at the ideal grip height
Built-in magnetic lock automatically holds the rail flush against the wall during travel — no manual latching required
Mounts directly to your RV's flat fiberglass wall — quick and straightforward installation with no major modifications
The SP56-469 Safe-T-Rail is designed exclusively for fifth wheels and travel trailers with flat fiberglass walls. It is explicitly not intended for motorhomes or any RV with corrugated steel walls or curved wall profiles. Do not order if your RV has: • A motorhome body (Class A, B, or C) • Corrugated or ribbed steel wall siding • Curved, angled, or non-flat wall surfaces at the entry • Insufficient clearance for the rail to extend and retract properly If you have a motorhome, see the MORryde Motorhome Safe-T-Rail, which is designed for that application. Use MORryde's Safe-T-Rail Qualifier guide to confirm your specific trailer is a match before purchasing.
Before purchasing the SP56-469, verify the following on your specific RV: 1. Flat fiberglass wall: The mounting bracket requires a flat, smooth fiberglass wall surface adjacent to the entry steps. Corrugated or textured surfaces are not compatible. 2. Adequate clearance: Confirm there is sufficient clearance beside the entry door for the rail to extend 42.5" outward without contacting the awning, slide-outs, steps, or other components in the retracted and extended positions. 3. Wall mounting location: The bracket mounts to the RV wall — ensure there is a suitable, accessible mounting surface in the correct position relative to your steps. Use MORryde's Safe-T-Rail Qualifier to confirm compatibility with your specific trailer before ordering.
Installation Steps: 1. Qualify Your RV: Confirm your trailer has a flat fiberglass wall, sufficient clearance, and proper mounting location using MORryde's Safe-T-Rail Qualifier 2. Identify Mounting Position: Position the wall bracket at the correct height and location relative to your entry steps — refer to the installation guide for exact placement guidance 3. Mount the Bracket: Secure the wall bracket to the flat fiberglass wall per the installation guide's hardware and fastener requirements 4. Attach the Rail: Connect the telescoping rail assembly to the wall bracket 5. Test Extension and Retraction: Extend the rail fully to 42.5" and verify clearance from all adjacent components — awning, steps, slide-outs 6. Verify Magnetic Lock: Fold the rail flat against the wall and confirm the magnetic lock holds it securely without manual latching Refer to MORryde's Safe-T-Rail Installation Guide for complete fastener specifications and step-by-step instructions.
In The Box: • Safe-T-Rail Telescoping Handrail Assembly • Wall Mounting Bracket • Mounting Hardware • Installation Instructions Also Available: • Short Safe-T-Rail (SP56-573) — shorter extension for taller RV entries • Motorhome Safe-T-Rail — for Class A, B, and C motorhomes
MORryde Technical Support: Phone: (574) 293-1581 Email: [email protected] Made in Elkhart, Indiana, USA MORryde is an ISO 9001 certified manufacturer of RV safety, entry, and specialty vehicle products.
MORryde offers multiple Safe-T-Rail configurations for different RV types and entry heights. Selecting the correct model for your specific RV is critical for proper fit and clearance.
Use MORryde's Safe-T-Rail Qualifier to confirm which model is correct for your specific RV before purchasing. Contact MORryde at (574) 293-1581 for fitment assistance.