Stop swapping ball mounts every time you hook up a different trailer. The B&W Tow & Stow TS20050B gives you all three common hitch ball sizes on a single adjustable, folding shank that disappears neatly under your bumper when you are not towing. Built for heavy-duty 2.5-inch receiver applications found on Class A motorhomes, large pickups, and HD tow vehicles.
The Tow & Stow series is B&W's answer to the ball-mount juggling act that every RV owner knows too well -- camper trailer needs a 2-5/16" ball, the boat trailer needs a 2" ball, and the small utility trailer needs a 1-7/8" ball. The TS20050B solves all three without digging through the truck bed for the right mount.
Unlike a standard drop mount that sticks out and collects shin bruises, the Tow & Stow folds up against the receiver when unloaded. It also adjusts for both rise and drop, so you can level the tow vehicle-to-trailer connection regardless of your hitch height.
Includes 1-7/8", 2", and 2-5/16" forged steel hitch balls welded to a single rotating head -- no loose hardware to lose at the campground.
The shank pivots up and locks flat when not towing, eliminating the dangerous protruding receiver stub that damages shins, bikes, and tow vehicles in parking lots.
Multiple shank position settings let you dial in the correct ball height for a level trailer connection across a wide range of tow vehicle and trailer hitch heights.
Sized for the 2.5-inch receiver tube found on Class A motorhomes, large HD pickups, and commercial tow vehicles where maximum tongue weight capacity is needed.
The TS20050B is aimed squarely at Class A motorhome owners, fifth-wheel drivers who also tow a dinghy or utility trailer on a tow dolly, and heavy-duty pickup owners who regularly switch between multiple trailers. The 2.5-inch receiver is less common than the standard 2-inch, but it is the standard on most full-size Class A coaches and many HD truck packages.
If you tow a toad (dinghy vehicle) on a dolly that uses a 2-inch ball, then haul a boat or camper on a 2-5/16" coupler, this single mount handles both without any swaps.
The shank inserts into your 2.5-inch receiver tube and is secured with a standard hitch pin and clip (pin and clip are included). The mount head rotates to select the correct ball size, then locks in place. To fold, remove the hitch pin, pivot the shank upward, and re-pin in the stored position.
Rise and drop adjustment is achieved by flipping the shank to run either drop-down or rise-up depending on whether your trailer coupler sits below or above the receiver tube centerline. Consult the ball height markings on the shank to match your specific trailer-to-vehicle height differential.
B&W offers the Tow & Stow in multiple receiver sizes. The TS20050B is the 2.5-inch receiver version, which is the largest and highest-capacity model in the lineup. Comparable models for smaller receivers include:
The TS20050B is specifically the black finish variant (the "B" suffix), matching most stock receiver tube finishes on coaches and dark-trimmed trucks.