Home > Home & Marine Upgrades > Wood & Pellet Stove Parts >

Avalon 250-00588 Convection Blower Motor for Avalon and Lopi Pellet and Gas Stoves -- 115V 1500 RPM

Avalon 250-00588 replacement convection blower motor for Lopi and Avalon pellet and gas stoves, 115V 1500 RPM Class B, NBK Parts 20134
Avalon 250-00588 Convection Blower Motor For Avalon/Lopi Pellet/Gas Stoves
 
List Price: $200.01
: $110.49
You save $89.52!
Part Number: 250-00588
Manufacturer: Avalon

Quantity in Stock :31

Free Shipping
Availability: In Stock
Qty:

 
Avalon115V / 1500 RPMClass B MotorAvalon 250-00588 Convection Blower Motor for Lopi and Avalon Pellet and Gas Stoves

When your Avalon or Lopi stove stops pushing warm air into the room, the convection blower motor is usually the culprit. The Avalon 250-00588 is the factory-specified replacement motor, restoring proper heat distribution to your pellet or gas stove. Running at 115V and 1500 RPM, this Class B motor is a direct drop-in for a wide range of Avalon and Lopi stove models -- no fabrication or adapters needed. Also cataloged as NBK Parts 20134.

Direct-Fit Replacement for Avalon and Lopi Stove Convection Systems

The convection blower motor circulates room air across the stove's heat exchanger and out into your living space. When this motor wears out -- often signaled by a noisy bearing, slow startup, or complete failure to spin -- replacing it with the correct part number is the fastest path back to full heat output. The 250-00588 matches the original motor's mounting footprint, shaft dimensions, and electrical specs, so installation is straightforward for anyone comfortable with basic appliance repair.

This motor is also cross-referenced as NBK Parts 20134, which may appear on aftermarket packaging or invoices. If you ordered under that number previously, this is the same component.

Direct OEM Replacement

Matches original mounting pattern and shaft specs for Avalon and Lopi stove models. No modification required.

Standard 115V Operation

Runs on standard 115V / 60Hz household current -- the same supply your stove already uses.

Class B Insulation

Class B thermal insulation rating means the motor windings are designed to handle the elevated ambient temps found inside stove cabinetry.

Wide Model Coverage

Fits seven Avalon and seven Lopi pellet and gas stove models -- see the full compatibility list below.

Why Replace Instead of Repair?

Blower motors with worn brushes, failed bearings, or shorted windings are not serviceable in the field. A direct replacement restores full airflow and stove efficiency immediately, with no balancing or recalibration needed after installation.

Cross-Reference Note

Part number 250-00588 is the Avalon/Travis Industries OEM number. The same motor is sold under NBK Parts number 20134. Both numbers refer to this exact unit.

Confirm Your Model Before Ordering

Not all Avalon or Lopi stoves use this motor. Verify your stove's model name against the fitment list below. If your model is not listed, check your stove's wiring diagram or contact Avalon/Travis Industries with your serial number to confirm the correct replacement part.

Compatible Stove Models

Avalon Models

  • 900 PS
  • 900 PI
  • AGP PS
  • Arbor
  • Astoria Bay PI
  • Astoria Bay PS
  • Astoria PS

Lopi Models

  • AGP
  • Fox Fire 400 PI
  • Fox Fire 400 PS
  • Fox Fire PS
  • Leyden
  • Yankee Bay
  • Yankee Bay PI
Installation Tips
  • Disconnect power to the stove completely before beginning any motor work.
  • Allow the stove to cool fully -- convection blower housings retain heat for an extended period after shutdown.
  • Label or photograph wiring connections before disconnecting the old motor to ensure correct reassembly.
  • Check the blower wheel for debris or damage while the motor is out -- a bent or clogged wheel will load the new motor prematurely.
  • After reinstalling, run the stove and verify airflow direction and volume match normal operation before leaving it unattended.

Electrical Specifications

Part Number (OEM)250-00588
Cross-Reference (NBK)20134
Voltage115V AC
Frequency60 Hz
Amperage0.40A
Speed1500 RPM
Insulation ClassClass B

Physical Specifications

Weight6 lbs

Application Information

ManufacturerAvalon (Travis Industries)
Stove TypePellet and Gas
Motor FunctionConvection (room air circulation)
Avalon Models Covered900 PS, 900 PI, AGP PS, Arbor, Astoria Bay PI, Astoria Bay PS, Astoria PS
Lopi Models CoveredAGP, Fox Fire 400 PI, Fox Fire 400 PS, Fox Fire PS, Leyden, Yankee Bay, Yankee Bay PI

What Is Included

In the Box1x convection blower motor (250-00588)
Mounting HardwareNot included -- reuse existing fasteners from original motor
Wiring HarnessNot included -- connects to existing stove harness
Important Information
  • Always disconnect the stove from line power before removing or installing this motor. Failure to do so creates a risk of electric shock.
  • This motor is intended for use in Avalon and Lopi stove models listed above only. Use in unlisted models has not been verified and may result in incorrect airflow or motor failure.
  • Class B insulation is suitable for stove convection applications but should not be operated in ambient temperatures exceeding the stove cabinet's rated range.
  • Mounting hardware and wiring are NOT included. Reuse the original hardware and inspect the harness connector before installation.
  • If the replacement motor exhibits vibration, unusual noise, or failure to reach rated RPM after installation, inspect the blower wheel for imbalance or obstruction before assuming a defective motor.


Browse for more RV Accessories in the same category as this item:

Home & Marine Upgrades > Wood & Pellet Stove Parts
Home & Marine Upgrades


$64.99
$192.00
$149.95
$15.45