Stop guessing which corner is high. The Camco 25507 EZ Level monitors side-to-side and front-to-back tilt at the same time, showing you exactly which direction to correct with bright, color-coded LEDs. An optional Bluetooth app lets you watch the readings from outside the rig while you work the jacks -- no helper required. Factory calibrated, battery powered, and portable: place it, level up, and stow it.
Most bubble levels only tell you about one plane at a time. The Camco EZ Level reads left/right and fore/aft simultaneously, so you know exactly how many clicks of jack travel you need -- in every direction -- before you pull the slides and set up camp.
The LED display uses a simple color language: green means level, and red LEDs light up on the low side so you instantly know which direction to crank. No math, no squinting at a bubble, no second trips inside to recheck.
Side-to-side and front-to-back tilt displayed at the same time. One tool covers both leveling planes without repositioning.
Green confirms level on each axis. Red LEDs mark the low side so correction direction is obvious at a glance, even in dim conditions.
Pair with the Camco EZ Level app (iOS and Android) to monitor readings on your phone while standing at the jacks -- no assistant needed.
Automatic power-down after inactivity protects your 3x AA batteries. No wiring, no shore power connection, no install required.
Setup takes under a minute:
The EZ Level works with any RV type -- travel trailers, fifth wheels, Class A/B/C motorhomes, and truck campers. Because it is portable and requires no mounting, it is equally useful as a permanent in-rig tool or as a service tool you carry between multiple vehicles.