Stop guessing whether your trailer is sitting level. The Camco Acculevel mounts permanently to the front of your trailer and gives you an instant read on both side-to-side and front-to-back tilt -- no separate tools, no walking around the rig. The oversized bubble ball is large enough to read from the driver seat, so you can dial in your leveling blocks and know you're done before you ever unhitch.
The Acculevel combines two bubble vials in a single compact housing. The primary large-ball indicator handles side-to-side leveling -- the most common adjustment on a trailer. A second integrated vial handles front-to-back pitch. Together they eliminate the need to carry a pocket level or make multiple trips to check your rig.
The sealed, fluid-filled vial design means the bubble won't disappear in cold weather and there's no risk of leaking. Mount it once with screws to the front trailer wall, and it's there every trip.
Oversized bubble is readable from the driver seat -- no need to walk to the front of the trailer to confirm level.
Side-to-side leveling plus a secondary front-to-back vial in one unit. Both planes in a single glance.
Fluid-filled vials won't leak, crack, or go dry in freezing temperatures -- reliable year-round in any climate.
Mounts permanently to the front of the trailer using standard screws. Stays in place trip after trip.
An unlevel RV is more than an inconvenience. Refrigerators in RVs -- particularly absorption-style units -- require near-level operation to circulate coolant properly. Being even a few degrees off can shorten the life of the cooling unit or cause it to stop cooling altogether. Leveling also affects slide-out operation, cabinet door alignment, and sleep comfort.
The Acculevel gives you a fixed reference point that's always in the same spot, so your leveling routine becomes repeatable and fast.
The large primary ball vial is sized so you can check side-to-side level without leaving the driver seat or sending a spotter. Pull forward, adjust your blocks or levelers, and read the result immediately.
If you need a mounting bracket for angle adjustment or recessed installation, look for the Camco Accu-Level Bracket (sold separately at RV Upgrade Store, SKU 03-0947). The bracket is not required for flat-surface mounting but makes positioning easier on ribbed or angled trailer fronts.
No routine maintenance required. If the vial fluid appears cloudy or the bubble no longer moves freely, the unit has likely been damaged by impact and should be replaced. Verify your baseline calibration at least once per season by checking against a precision level.