A reliable, code-compliant propane hose built for RV high-pressure LP gas systems. Connects appliances to LP supply lines or links kitchen slide-outs to the main RV gas piping -- all with certified safety at both ends.
The MB Sturgis part 06-1382 is a 36-inch high-pressure propane flex hose designed for permanent or semi-permanent connections within your RV's LP gas system. With identical 3/8-inch female inverted flare fittings on both ends, it mates directly to standard LP tubing fittings without reducers or adapters in most installations.
This hose is rated for high-pressure propane service -- meaning it can handle the output side of a first-stage regulator or the full line pressure of a two-stage system before the final appliance regulator steps pressure down. It is equally suited to low-pressure applications where a flexible connection is needed.
Certified to UL569 and CSA 8.3 standards for LP gas hose assemblies -- meeting codes required by most RV parks and inspection programs.
3/8-inch female inverted flare fittings on both ends mate to standard LP compression and flare fittings found throughout RV gas systems.
36 inches of flex length gives slide-out kitchen connections the range of motion they need without kinking or straining fittings.
Backed by MB Sturgis's limited 1-year manufacturer warranty against defects in materials and workmanship.
This hose is a practical solution for several recurring RV gas plumbing tasks:
This hose is listed as compatible with two-stage regulator systems -- the most common LP regulator configuration in modern RVs. In a two-stage system, the first stage drops tank pressure to an intermediate level (roughly 10-15 PSI), and the second stage brings it to appliance-ready pressure (typically 11 inches water column / about 0.4 PSI). This hose can serve as the flex section between either stage and a downstream appliance or distribution point.