The Redarc Tow-Pro Elite Trailer Brake Controller is an electric brake controller designed to suit most common trailer braking applications while requiring minimal dash space and is simple to install and operate.

• The Tow-Pro Elite electric trailer brake controller features Active Calibration which constantly monitors the direction of travel
  • The unit will even calibrate with no trailer attached whilst maintaining the ability to mount in any orientation.
• The unit is able to operate both electric and electric/hydraulic trailer brakes and will operate from either 12 Volt or 24 Volt vehicle systems without the need for manual selection or extra components or wiring.
• AL-KO ESC and Dexter Sway Control System compliant.
• The brake controller activates trailer brakes in proportion to your vehicle's braking action
• Automatically adjusts trailer's braking based on deceleration of tow vehicle
• Activates immediately - no pausing like with time-delayed brake controllers
• Control knob mounts in the dash or other easily accessible areas
• Allows for fast and easy adjustment of braking power with the turn of the dial
• Allows you to switch from proportional braking to user-controlled mode
• Provides accessible manual override - just press the knob to activate
• Offers simple diagnostics with bright, colored LED
• The main unit installs out of sight
• No more banging your knee on a bulky controller
• No interference with airbags or other vehicle accessories
• No hard-to-reach override lever or impossible-to-read screen
• 2 Different braking modes available
• Set in the proportional mode for everyday use
• Get absolute control over trailer braking activity with user-controlled mode - great for off-roading
• 3-Axis accelerometer measures deceleration in all directions for precise braking and smooth, uniform stopping action
• Can be mounted at any angle and will still accurately sense the deceleration of your vehicle
• Active calibration technology continuously monitors your direction of travel and adjusts brake response accordingly
• Application: trailers with up to 3 axles (6 brake assemblies)
• Designed for use with electric or electric-over-hydraulic trailer brakes
• Works with 12-volt and 24-volt vehicle electrical systems
• Under dash mounting bracket kit not included, see part EBMK-001
• Note: TPH-025 universal wiring harness is included. Vehicle-specific wiring harnesses are available separately, see the frequently bought section below to locate the right harness for your vehicle.
• Other Tow-Pro Elite Accessories:
  • Encapsulated protection device: EPDK-001
  • 30 amp circuit breaker kit: CBK30-EB
• Dimensions:
  • Main unit: 3-3/8" long x 3-15/16" wide x 1-1/8" tall
  • Control knob dimensions: 2-3/8" long x 3/4" wide x 7/8" tall
• Output voltage range: 9V - 32V
• Output current rating: 25 amps continuous
• Maximum charging voltage: 12V DC
• Weight: 1 lb.
• Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety
• Includes (1) remote head assembly, (1) main unit, (1) remote head nut, (1) remote head knob (EBRH-ACCV3-RH), (1) remote head bezel, (1) 3 ft remote head cable (RHWK-001), main unit wires & connector, (1) TPH-025 universal wiring harness, and (1) Tow-Pro universal switch insert panel TPSI-001.
• 2-year manufacturer warranty

Redarc Tow-Pro Elite Trailer Brake Controller