Home > Jacks & Levelers > Socket Jenie >

Socket Jenie LVSG-876 Raising & Lowering Fold Down Camper Roofs
Socket Jenie LVSG-876 Raising & Lowering Fold Down Camper Roofs
Socket Jenie LVSG-876 Raising & Lowering Fold Down Camper Roofs


 
: $23.95
MFG P/N: LVSG-876
MFG: Custom Cylinders
Weight (lbs): 2
Shipping: Free Shipping on Orders $99 or More!


Availability:
In Stock
Product Code: LVSG-876
Qty:

Description
 
SOCKET JENIE LVSG-876 FOR RAISING & LOWERING FOLD DOWN CAMPER ROOFS THAT USE A 7/8" ROUND CRANK (Free length of socket body=8 1/8")
  • The LVSG-876 socket requires a 1/2" drill chuck, and must be used with a low RPM/ high torque drill motor. A general drill would be: 110V drill (should not be less than 5 amps) while a battery powered drill should be 24V.
  • It is suggested that the 110V or cordless drill, should have the extra front mounted handle to control the torque required to raise or lower the roof.
  • The free length of this socket represents the distance that the crank inserts into the camper body to operate the roof. Free length of socket body=8 1/8".The portion of the socket that fits into the drill chuck is not included in the free length.
  • KNOWN BRANDS THAT USE THIS SOCKET: Fleetwood & Coleman. NOTE: Fleetwood campers manufactured after 2004 increased the distance of the bumper from the body by 3". To make certain that this design will fit your camper it is necessary that the amount of crank inserted into the camper body be carefully measured.
  • The body of this socket is slightly over 8", and has a 1" extension that fits into the drill chuck.

Drill Socket For Raising & Lowering Pop-Up Camper Roofs

Additional Product Information
Note: If you cannot find the socket Jenie you are looking for, please fill out this form and email it to us at sales@rvupgradestore.com and we be more than happy to help you get the one you need.
Socket Jenie Form