The Sidewinder keeps your RV sewer hose sloped consistently from the coach to the dump station connection, even when the ground is uneven, sloped sideways, or requires routing around obstacles. Deep cradles grip the hose without additional straps, and welded seam construction prevents the accordion sections from creeping closed once you have them positioned.
A loose, sagging sewer hose is more than an annoyance -- it allows waste to pool in low spots, slows drainage, and puts stress on fittings. The Sidewinder holds your 3-inch RV sewer hose elevated and angled from coach to ground connection so gravity does the work every time.
The graduated leg height -- taller at the coach end, shorter at the dump end -- creates a built-in downhill slope. Sections flex and pivot on their joints so you can route around wheel chocks, stabilizer feet, slide-out hardware, or uneven pavement without improvising with bricks or boards.
The cradle channel is 2.5 inches deep, which is enough to retain a standard 3-inch sewer hose without any hook-and-loop straps or separate clips.
Each accordion joint is welded rather than snapped together, preventing sections from creeping closed under the weight of a full hose.
Individual sections pivot independently, letting you snake the support around slide-out pads, stabilizer jacks, curbs, or anything else in the path.
Collapses from 30 ft down to just 14.5 inches -- fits easily in an RV basement compartment or truck bed alongside the sewer hose itself.
The package contains one Sidewinder sewer hose support at 30 ft extended length and one velcro strap for securing the collapsed unit during transport or storage. Sewer hose, fittings, and gloves are NOT included.
The tall end stands 9.75 inches and the low end stands 6.75 inches, giving you a consistent natural slope toward the dump connection without leveling or shimming the support yourself.
Designed specifically for standard 3-inch diameter RV sewer hoses -- the type used on virtually all Class A, Class B+, Class C, fifth wheels, and travel trailers built for North American campground hookups. If you are using a 4-inch diameter commercial-grade hose, verify cradle width before ordering.
Camco also offers the Sidewinder in a 20 ft version (Camco 43051). The 30 ft support is the right choice when:
Rinse the support with fresh water after each use. Lightweight plastic construction is UV-resistant for outdoor storage but will benefit from shade or a storage bag on extended trips. Inspect welded joints annually -- replace if any section cracks or no longer holds its extended position under load.
For a complete sewer kit, consider pairing the Sidewinder with a Camco RhinoFLEX sewer hose (Camco 39741 or 39761), a Camco 4-in-1 Sewer Fitting (Camco 39503), and Camco disposable gloves. The Sidewinder supports the hose; the right fittings and hose complete a leak-free connection.