Magnetic toilet paper holder for RV, van, camper, and marine bathrooms, with anti-roll function, rubber-coated magnets, and included adhesive metal strip for no-drill wall mounting.
The Silwy TPH-1-B magnetic toilet roll holder is designed for flexible toilet paper storage in RVs, camper vans, boats, motorhomes, and small bathrooms where drilling into walls or cabinets may not be preferred. The magnetic holder attaches to the included metal strip, giving you a removable holder that can be placed where it is most convenient.
Its anti-roll function helps keep toilet paper from unrolling during travel, while the rubber-coated power magnets help protect compatible surfaces from scratches. The holder can also attach to suitable metal surfaces, making it useful inside or outside the vehicle when paired with the right mounting surface.
Secures to the included metal strip or compatible metal surfaces
Helpful for motorhomes, vans, boats, campers, and compact bathrooms
Helps prevent toilet paper from unrolling while driving or traveling
Included adhesive metal strip allows mounting without screws
The included metal strip is intended for smooth, sealed surfaces and is permanently attached using adhesive. Verify the mounting surface is clean, dry, smooth, sealed, and suitable for adhesive installation before applying the strip. This product is magnetic, but it still requires a compatible metal surface or the included metal strip for secure mounting. It should not be attached directly to unfinished wood, fabric, textured walls, dusty surfaces, or weak/peeling wall coverings.
Before Starting: Choose a smooth, sealed mounting surface with enough clearance for the toilet roll to spin freely. Confirm the location will not interfere with doors, drawers, shower curtains, cabinet faces, or toilet use. Basic Installation Steps: 1. Choose Location: Hold the toilet roll holder in place and confirm roll clearance, user reach, and travel clearance. 2. Clean Surface: Clean the mounting surface thoroughly and allow it to dry completely before applying the metal strip. 3. Check Surface Suitability: Use only on smooth, sealed surfaces suitable for adhesive mounting. 4. Apply Metal Strip: Remove the adhesive backing and press the metal strip firmly into place according to Silwy mounting instructions. 5. Allow Adhesive to Set: Let the adhesive bond before loading or stressing the holder, following the product instructions. 6. Attach Holder: Place the magnetic toilet roll holder onto the metal strip. 7. Load Toilet Paper: Install one standard toilet paper roll and confirm the anti-roll function is positioned correctly. 8. Check Before Travel: Confirm the holder is secure before driving or boating.
Package Contents: • 1 Silwy TPH-1-B magnetic toilet roll holder, black • 1 adhesive metal strip for magnetic wall mounting NOT Included — May Also Need: • Toilet paper roll • Extra adhesive strips or replacement metal strips • Surface cleaner or alcohol wipe • Mounting screws or anchors — this product is designed for adhesive/magnetic mounting • Additional Silwy metal nano-gel pads or magnetic accessories unless separately stated This listing is for the magnetic toilet roll holder and included metal strip only unless otherwise stated. Confirm mounting surface and installation location before ordering.
To confirm this holder is right for your setup, consider the following: • Whether the bathroom wall or cabinet surface is smooth and sealed • Whether adhesive mounting is acceptable for the surface material • Whether there is enough clearance for a toilet paper roll • Whether the holder location will be reachable while seated • Whether the holder could interfere with a shower curtain, cabinet, door, drawer, or toilet lid • Whether you prefer removable magnetic placement over permanent screw mounting Why this matters: RV and marine bathroom walls vary widely, and adhesive-backed mounting strips may not perform properly on textured, dusty, damp, flexible, unfinished, or damaged surfaces.
Match this holder by mounting surface, adhesive suitability, roll clearance, bathroom layout, and travel needs. Test placement before applying the adhesive metal strip.
If mounting issues continue, check surface type, surface cleanliness, adhesive cure time, roll clearance, holder orientation, and whether the holder is fully seated on the metal strip.
This holder is intended for toilet paper storage only. Do not use it as a grab handle, towel bar, step, support handle, or load-bearing fixture. Do not mount on weak, damaged, textured, damp, unfinished, or unsuitable surfaces. Keep the adhesive metal strip dry and protected from prolonged direct sunlight when possible, and confirm the holder is secure before travel.