Universal one-piece bulb and wiper seal with adhesive backing. 15/16" H x 3-3/16" W — 15 ft roll. EPDM rubber. Black. Commonly used on Forest River fifth wheels and 2013 Itasca Meridian motorhomes.
The Steele Rubber Products 90-3452-265 is a unique universal one-piece bulb and wiper weatherstrip with Peel-N-Stick adhesive backing — designed to replace just about any RV slide-out seal configuration in a single, self-contained profile. Rather than requiring a separate bulb seal and wiper seal installed on different mounting points, this all-in-one design combines both functions in a single strip that adheres directly to the slide-out frame.
The hinged section allows the seal to flex around right angles and conform to various wall thicknesses and thin lips, making it a highly versatile replacement for many different original configurations. The exclusive Peel-N-Stick skirting design delivers a clean finished appearance with no unsightly gaps while also protecting the exposed edges of the adhesive tape for a long-lasting bond. A ball-tipped wiper ensures consistent wiping action as the slide-out box extends and retracts.
Made from 100% EPDM rubber with superior wear and weather resistance, this seal is commonly used on current Forest River fifth wheels and 2013 Itasca Meridian motorhomes. The 15-foot roll is the right-sized option for a single slide-out side replacement or targeted section repair without purchasing excess material. This part is also known as 70-3800-265.
Combines bulb and wiper in a single strip — replaces virtually any slide-out seal configuration without separate components
Hinged section allows the seal to wrap right angles and adapt to various wall thicknesses and thin lips
Adhesive-backed for simple installation — peel off the backing and press into place, no hardware or track needed
100% EPDM rubber with superior wear and weather resistance — will not fade, shrink, or crack
This seal is known to fit current Forest River fifth wheels and 2013 Itasca Meridian motorhomes, and may fit many other RV brands and models with similar slide-out configurations. Compatibility is not guaranteed for all years and configurations — this is not an exhaustive fitment list. Before ordering, measure your existing seal carefully and confirm that dimensions match (15/16" H x 3-3/16" W). Because this is an adhesive-backed seal, ensure your mounting surface is clean, dry, and free of old adhesive residue for the best long-term bond.
Primary Part Number: 90-3452-265 Also Known As: 70-3800-265 Available Lengths (Same Profile): • 15 ft — Part 90-3452-265 (This Item) • 30 ft — Part 90-3453-265 • 60 ft — Part 90-3454-265 Note: Also available by the foot for custom lengths — select the number of feet needed and it will be sent as one continuous piece (maximum continuous length of 75 ft).
What You Need: No mounting hardware or track required. The Peel-N-Stick adhesive backing bonds directly to the slide-out frame surface. Basic Installation Steps: 1. Remove Old Seal: Peel away the existing seal and thoroughly clean the mounting surface, removing all old adhesive residue, dirt, and moisture 2. Measure & Cut: Measure the length needed and cut the seal using scissors or a sharp utility knife 3. Dry Fit: Test the seal position around any corners or angles using the hinged section before removing the adhesive backing 4. Peel & Press: Remove the adhesive backing and press the seal firmly onto the mounting surface, working from one end to the other 5. Test the Slide: Extend and retract the slide-out to confirm the wiper moves smoothly and the seal compresses properly against the RV body
Included: • One (1) 90-3452-265 Peel-N-Stick One-Piece Bulb & Wiper Weatherstrip • 15-foot pre-cut length • Adhesive backing included — ready to install • 100% EPDM black rubber construction NOT Included — May Be Needed: • Surface prep cleaner (adhesive remover, isopropyl alcohol) • Installation tools (scissors or utility knife, tape measure)
Always measure your existing seal and verify your slide-out's mounting surface before ordering. Compatibility is based on known fitment and may vary by individual RV model, production year, and manufacturing variations.