3/8" H x 9/16" W 100% EPDM sponge rubber hollow rectangular seal with closed-cell core, solid skin surface, and 3M Peel-N-Stick skirting adhesive. Wraps tight radius. Ideal for RV doors, compartments, and hatches. Commonly found on Fleetwood Pulse 24D and Jayco Redhawk, Melbourne, and Greyhawk Motorhomes. Black, 15 ft pre-cut strip. Also known as 83-0109-277.
The Steele Rubber Products 83-0111-277 is a 3/8" H x 9/16" W Peel-N-Stick Large Hollow Rectangular sponge rubber seal ā a superior-grade 100% EPDM extrusion ideal for sealing RV doors, storage compartments, and hatches. The hollow rectangular profile compresses when the door or hatch closes, creating a consistent perimeter seal that keeps out moisture, wind, debris, and UV exposure.
Unlike standard foam weatherstrips, this seal features a closed-cell sponge rubber core surrounded by a solid skin surface for significantly better weather and wear resistance. The hollow interior allows the profile to compress easily under door closure force while springing back cleanly when opened, maintaining a reliable seal through repeated use cycles. A key advantage of this profile is its ability to wrap a tight radius ā the hollow rectangular shape follows curved door corners and contoured hatch openings without kinking or losing adhesion.
Installation is simple with the exclusive 3M Peel-N-Stick skirting adhesive: peel off the backing and press firmly onto a clean, dry surface. The skirting design surrounds the adhesive edges for a clean finished look, protects the bond from debris and moisture intrusion, and ensures a long-lasting grip. This profile is commonly found on the Fleetwood Pulse 24D and Jayco Redhawk, Melbourne, and Greyhawk Motorhome storage compartments, making it a trusted replacement for owners of those models.
Compresses uniformly under door closure and springs back cleanly ā consistent perimeter seal through repeated open/close cycles
Closed-cell sponge core surrounded by solid skin surface ā outlasts standard open-cell foam in weather and wear resistance
Hollow profile flexes to follow curved corners and contoured door openings without kinking or losing adhesion
Exclusive skirting surrounds adhesive edges ā clean finished look, adhesive edge protection, and long-lasting surface grip
Apply between 60Ā°F and 104Ā°F (15Ā°Cā40Ā°C) for best adhesive bond strength. The temperature difference between the seal and the bonding surface should be as small as possible. Surface Preparation: Completely remove all old seal material, adhesive residue, dirt, wax, and moisture before applying. Wipe the bonding surface with isopropyl alcohol and allow to fully dry. Thorough surface prep is always recommended for a long-lasting bond.
Primary Part Number: 83-0111-277 Also Known As: 83-0109-277 Known RV Fitment (not exhaustive): ā¢ Fleetwood Pulse 24D ā storage compartment doors ā¢ Jayco Redhawk Motorhome ā storage compartment doors ā¢ Jayco Melbourne Motorhome ā storage compartment doors ā¢ Jayco Greyhawk Motorhome ā storage compartment doors Available Lengths (Same Profile): ā¢ 5 ft ā same profile, shortest length ā¢ 10 ft ā same profile ā¢ 15 ft ā Part 83-0111-277 (This Item) ā¢ 30 ft ā same profile, longest length ā¢ Also available by the foot for custom lengths Note: Compatibility is not guaranteed. Always confirm fit against your specific model before purchasing. Application temperature 60Ā°Fā104Ā°F.
What You Need: No tools required for adhesive application. Recommended supplies: isopropyl alcohol, clean cloth, tape measure, scissors or utility knife. Basic Installation Steps: 1. Check Temperature: Confirm ambient temp is between 60Ā°F and 104Ā°F (15Ā°Cā40Ā°C) ā match surface and seal temperature as closely as possible 2. Remove Old Seal: Completely remove all old weatherstrip material and adhesive residue from the mounting surface 3. Clean & Dry: Wipe the bonding surface with isopropyl alcohol and allow to fully dry 4. Measure & Cut: Measure the door or hatch perimeter and cut the seal to length ā the hollow profile wraps curved corners cleanly 5. Peel & Press: Remove the skirted adhesive backing and press the seal firmly onto the mounting surface, working from one corner around the full perimeter 6. Test the Closure: Close the door or hatch to confirm the hollow profile compresses evenly and creates a consistent, gap-free seal
Included: ā¢ One (1) 83-0111-277 Peel-N-Stick Hollow Rectangular RV Seal ā¢ 15-foot pre-cut strip ā¢ 100% EPDM sponge rubber, 3/8" H x 9/16" W hollow rectangular profile ā¢ 3M Peel-N-Stick adhesive with exclusive protective skirting NOT Included: ā¢ Isopropyl alcohol or adhesive remover for surface prep ā¢ Clean cloth, tape measure, scissors or utility knife
All lengths share the same 3/8" H x 9/16" W 100% EPDM sponge hollow rectangular profile with 3M Peel-N-Stick skirting adhesive. Also available by the foot for custom lengths. Order the length that best matches your project to minimize waste.