Home > Carriers & Haulers > Bike Carriers >

Swagman 80600 4-Position RV Bumper Bike Carrier -- Fits 4" to 4.5" Square Steel Bumpers

Swagman 80600 4-Position RV Bumper Bike Carrier mounted to square steel RV bumper, holding four bicycles, steel construction with tire rails
Swagman 4 Position RV Bumper Bike Carrier
 
Alternative Views:


List Price: $258.99
: $215.99
You save $43.00!
Part Number: 80600
Manufacturer: Swagman

Quantity in Stock :20

Free Shipping
Availability: In Stock
Qty:

 
Swagman4-Bike CapacityLifetime WarrantySwagman 80600 4-Position RV Bumper Bike Carrier

Haul up to four bikes behind your RV without a hitch receiver or drilling a single hole. The Swagman 80600 clamps directly onto any continuous-welded square steel bumper between 4" and 4.5" wide, so setup is straightforward and removal is just as quick when you reach camp. When the bikes stay home, the same rack handles extra cargo -- coolers, gear bags, folding chairs -- on its corrosion-resistant steel platform.

Four Bikes, One Rack, Zero Hitch Required

Most RV bike-transport setups demand a 2" receiver hitch and a separate hitch-mount rack. The Swagman 80600 skips all of that. It grabs onto the square steel bumper your rig already has, locks in place, and gives you four independent tire rails plus upright support bars to keep each bike stable on the road. Tire rails accommodate a range of wheel sizes and frame styles, so a mix of adult bikes is no problem -- just keep bike lengths similar to avoid frame contact during transport.

The rack extends 34" out from the bumper face, giving each bike room to hang without crowding the rig. The first bike position sits just 4-3/4" off the bumper, and each subsequent position is spaced for easy loading and unloading. At 30 lbs per bike, the 80600 handles standard adult bicycles comfortably.

Bumper-Mount Design

No hitch receiver needed. Clamps onto any 4" to 4.5" continuous-welded square steel RV bumper for a secure, tool-minimal installation.

4-Bike Capacity

Carries up to four adult bicycles simultaneously. Upright bars add lateral support; tire rails hold wheels firmly during travel.

Multi-Use Platform

Off-season or between rides, the corrosion-resistant steel rack doubles as a cargo platform for gear, chairs, and other campsite essentials.

Lifetime Warranty

Swagman backs the 80600 with a limited lifetime manufacturer warranty, covering defects in materials and workmanship.

Loading and Road Use Tips

Load bikes of similar frame length to prevent handlebar and pedal contact between adjacent bikes. Secure each bike with individual straps or bungee cords at the frame -- the rack positions the bikes, but additional tie-downs are strongly recommended for highway travel. Check all clamp hardware for tightness before each trip and after the first 50 miles.

Double-Duty Cargo Carrier: Even without bikes on board, the Swagman 80600 stays on the bumper and acts as a rear cargo shelf. It is a practical place to strap down a folding table, firewood, or camp chairs you want to keep out of the living space.
13.5" Wall-to-Hanger Offset: The center of each bike hanger sits 13.5" out from the bumper wall, which keeps bike tires clear of the rig's rear and reduces the chance of contact with slide-outs or steps during loading.
Not for Aluminum or Spot-Welded Bumpers: This carrier is engineered for continuous-welded solid square steel bumpers only. Aluminum bumpers and spot-welded bumpers do not provide the structural integrity required and must not be used with this rack.
Maintenance: Inspect welds and clamp hardware seasonally. Rinse the rack after travel on salted roads to extend the life of the corrosion-resistant finish. Lubricate clamp threads lightly before winter storage.

Carrier Specifications

ManufacturerSwagman
Part Number80600 (SWG80600)
UPC776214806003
SKU92-1350

Dimensions and Capacity

Bike Capacity4 bikes
Max Load Per Bike30 lbs
Rack Depth (bumper to end)34 inches
Wall to Hanger Center13.5 inches
First Bike Position4.75 inches out from bumper face

Fitment Requirements

Bumper Width (minimum)4 inches square
Bumper Width (maximum)4.5 inches square
Bumper Type RequiredContinuous-welded square steel
Incompatible Bumper TypesAluminum, spot-welded steel

Construction and Warranty

Frame MaterialSteel with corrosion-resistant finish
WarrantyLimited lifetime manufacturer warranty
Sold AsSingle unit (1 carrier)
Important Information
  • For use ONLY on continuous-welded square steel bumpers between 4" and 4.5" wide. Do not use on aluminum or spot-welded bumpers -- structural failure risk.
  • Maximum rated load is 30 lbs per bike position. Do not exceed this limit.
  • Bikes must be of similar length to prevent frame and component contact between adjacent positions.
  • Additional tie-down straps at each bike frame are strongly recommended for highway travel -- tire rails alone are not sufficient to secure bikes at speed.
  • Verify all clamp bolts are tight before departure and recheck after the first 50 miles of travel.
  • This product is sold individually. Bike straps and locks are not included.


Browse for more RV Accessories in the same category as this item:

Carriers & Haulers > Bike Carriers
Carriers & Haulers


$35.95
$40.99
$15.49
$76.83