Home > Steps & Ladders > Interior and Exterior RV Ladders >

Lippert On-The-Go Telescoping Aluminum RV Ladder 14'5" Extended 330 lb Capacity 2021126697

Lippert On-The-Go Telescoping Aluminum RV Ladder 2021126697 extended to 14 feet 5 inches with segmented step locks and rubber feet
Lippert On-The-Go Telescoping Ladder, 14' 5" Extended
 
Alternative Views:


List Price: $278.44
: $278.44
Part Number: 2021126697
Manufacturer: Lippert

Quantity in Stock :25

Free Shipping
Availability: In Stock
Qty:

 
Lippert14'5" Extended330 lb CapacityLippert On-The-Go Telescoping Aluminum RV Ladder -- 14'5" Extended, Part 2021126697

Get safe, confident roof access for your RV with this full-extension telescoping aluminum ladder. It reaches 14 feet 5 inches fully extended -- tall enough for most Class A, Class C, and fifth-wheel rooflines -- then collapses to just under 36 inches for storage in a basement compartment, truck bed, or storage bay. No assembly required; unfold, extend, lock each step, and climb.

Stable Roof Access That Travels With You

Most RV owners have one of two problems: a fixed ladder that doesn't go where they need it, or a bulky extension ladder that barely fits in a tow vehicle. The Lippert On-The-Go solves both. Its telescoping aluminum construction compresses to 35.75 inches -- short enough to secure inside most storage bays -- while the segmented locking system lets you set any intermediate height and hold it securely.

The angled stance is engineered specifically for RV rooflines. When fully extended at the designed lean angle, the top of the ladder reaches approximately 22 inches above the roof edge, giving you a secure handhold as you step on and off the roof. That overhang detail is often what separates a safe roof access ladder from a dangerous one.

Segmented Step Locks

Each rung locks independently as you extend. You control exactly how far the ladder deploys, and every step is positively locked before you climb.

Aluminum Construction

Lightweight aircraft-grade aluminum keeps total ladder weight at 27 lbs while supporting a 330 lb working load capacity.

Grooved Rungs

Each rung is 1.5 inches deep with grooved tread surface for grip even in light rain or morning dew -- a real-world concern when accessing an RV roof.

Compact Storage

Retracts to 35.75 inches. Velcro carry strap holds it bundled for transport. Molded rubber feet protect your storage bay floor.

Designed for RV Roof Work -- Not Just a Generic Ladder

Standard telescoping ladders are made for contractors standing on flat ground next to flat walls. The Lippert On-The-Go is sized and angled for RV use: the extended height is chosen to reach the roofline of the most common towable and motorhome profiles, and the angled extension geometry means the top of the ladder extends past the roof edge rather than butting up against it. That 22-inch overhang above the RV gives you something to hold as you transition from ladder to roof.

The 5/8-inch diameter steel locking pins anchor each extension segment and are sized to resist side-load flex when you're on the upper rungs. The molded rubber feet grip asphalt, gravel, grass, and concrete -- the kind of uneven, variable surfaces found at campgrounds.

No Assembly Required: The ladder arrives ready to use. Extend, lock each step segment, lean against your RV, and climb. There are no tools, no loose hardware, and no sections to connect on-site.

Storage and Transport

At 35.75 inches retracted and 27 lbs, this ladder fits in most RV basement compartments, truck beds, and fifth-wheel storage bays. The included Velcro strap keeps the ladder from rattling or unfolding in transit. If you carry it on the outside of a tow vehicle, the smooth aluminum profile won't snag on cargo nets or straps.

Carrying Tip: The Velcro strap is included and wraps around the collapsed ladder to keep segments from sliding during transport. Store the ladder vertically in a basement bay to save floor space.

Who This Ladder Is For

  • RV owners who need occasional roof access for HVAC maintenance, sealant inspection, or antenna work and don't have a built-in roof ladder
  • Full-timers and seasonal campers who want a ladder that stores inside the rig rather than hanging on the back
  • Technicians and mobile RV service providers who work on multiple units and need a portable, tall ladder
  • Anyone whose fixed RV ladder is damaged, undersized, or missing
Maintenance Reminder: After exposure to road salt or extended outdoor storage, rinse the aluminum rails and inspect the steel locking pins for surface rust. A light coat of silicone spray on the pin mechanisms keeps extension and retraction smooth.

Product Specifications

ManufacturerLippert
Part Number2021126697
Vendor Part NumberLIP2021126697
UPC848150002563

Dimensions and Weight

Extended Height14 ft 5 in (173 inches)
Retracted Length35.75 inches
Roof Overhang (extended)Approximately 22 inches above RV roofline
Ladder Weight27 lbs

Construction and Materials

Frame MaterialAluminum
Locking Pins5/8 in diameter steel
FeetMolded rubber, non-slip
Rung Depth1.5 inches, grooved tread
Locking SystemSegmented per-step locks

Capacity and Ratings

Weight Capacity330 lbs
Assembly RequiredNo
Included AccessoriesVelcro carry strap

Application Fit

Primary UseRV roof access -- motorhomes, fifth wheels, travel trailers
Extension AngleAngled from ground to RV roof (standard lean angle)
Typical Roof Height CompatibilitySuited for most Class A, Class C, and fifth-wheel roof heights
Important Information
  • Maximum working load is 330 lbs. Do not exceed this limit. This includes the climber's body weight plus any tools or materials being carried.
  • Always inspect each segmented step lock before climbing. Every rung must be positively locked. Do not climb if any segment feels loose or fails to click into position.
  • Position the rubber feet on firm, level ground. Soft soil, wet grass, or uneven surfaces can cause the feet to shift. Use a board or ladder leveler on unstable ground.
  • The 22-inch overhang is measured when the ladder is leaned at the recommended angle. Changing the angle changes both the overhang dimension and the stability of the lean -- do not stand the ladder more upright than designed.
  • Inspect steel locking pins periodically for corrosion, especially after driving in wet or salty conditions. Replace pins if pitting or deformation is visible.
  • This ladder is designed for one person at a time. Do not allow multiple people to use the ladder simultaneously.
  • No assembly is required, but confirm the Velcro strap is removed and all segments are fully locked before climbing each use.


Browse for more RV Accessories in the same category as this item:

Steps & Ladders > Interior and Exterior RV Ladders
RV Accessories
Steps & Ladders


$85.99
$4.24
$13.49
$52.49