Home >

XT Water Heater, 10 Gallon, Gas & Electric

Atwood XT Water Heater, 10 Gallon, Gas & Electric

: $874.26

Part Number: 94026
Manufacturer: Attwood
UPC #: 692931940267

Quantity in Stock :

Availability: Out of Stock

No Longer Available

The 94026 Atwood XT 10 Gallon gas & electric water heater produces the equivalent of 16 gallons of hot water despite its 10 gallon capacity. To achieve this, the Atwood XT heats cold water to a hotter temperature, then mixes it with more cold water through a rear mixing valve comes installed. As a result, it gives you 50% more hot water. The XT is able to be installed in the same cut-out sizes that would fit an existing Atwood 10 gallon water heater. Includes pre-installed winterizing by-pass kit. Cutout Dimensions: 15-1/2"H x 16"W x 20-3/4"D

Atwood XT Water Heater, 10 Gallon, Gas & Electric

Save Money—The Atwood XT comes pre-configured for installation with a winterizing bypass capability, reducing OEM’s installation expense. The Atwood XT can also be installed in the same cut-out space as the current, popular Atwood Water Heater, saving OEMs the expense of having to redesign their coaches to accommodate for bigger, bulkier, heavier water heaters.
Save Time—The Atwood XT pre-configured winterizing capability eliminates one additional, time-consuming installation step. The valve, hose, tee, and thermostatically-controlled mixing valve, with a check valve and a cold water passage, allows you to isolate and drain the tank and pump antifreeze through the plumbing circuit. Because Atwood has greatly increased hot water output while maintaining the size and weight of the water heater, OEMs can simply install the Atwood XT in the same cut-out dimension that they have grown accustomed!
Save Weight—A comparable 16-Gallon water heater would weigh about 50 pounds more with the weight of 6 gallons of water and the additional material needed to build a larger water heater than the 10-gallon XT. The Atwood XT uses Exothermal Technology to provide the equivalence of 16-Gallons of hot water while maintaining the same weight as the best-selling, popular Atwood Water Heaters the industry has grown accustomed to. A comparable 9-gallon water heater would weigh about 25 pounds more than the 6-gallon XT.
Save Space—Atwood’s Exothermal Technology has increased the hot water output of the Atwood XT Water Heater, not the size of the water heater! While some manufacturers are trying to provide additional hot water by creating bigger, bulkier, heavier water heaters, Atwood provides a more efficient solution—


SMI Stay-IN-Play Duo Towed Vehicle Braking System	Shurflo Housing 1/2" Female Ports - 10"	Blue Ox BX2698 Ford Bronco 2021-2025 Standard Bumper Baseplate - ACC, Shutters, EcoBoost	Seat Armour Towel with Buick Logo - Gray
$1,265.17	$16.46	$635.00	$35.95