Starter solar wiring kit for connecting an RV solar panel or PV array to a charge controller and battery. Includes weather-resistant 10 AWG MC4-type PV cables, battery cables with ring terminals, ferrule ends for controller connections, and a built-in 30A DC ATC fuse.
The Xantrex 708-0150 Solar Starter Cable Kit is designed to help connect a solar panel or PV array to a charge controller, then connect the charge controller to the battery bank. It provides the main cable pieces needed for many starter RV solar installations.
The kit includes a pair of 20-foot MC4-type PV cables for the solar panel side and a pair of 10-foot battery cables for the battery side. Both the PV and battery cables include built-in ferrule terminations for quick, clean charge controller connections, while the battery cables include ring terminals and a built-in 30A DC ATC fuse on the red cable.
20-foot MC4-type PV cables connect the solar panel or PV array to the charge controller
10-foot battery cables connect the charge controller to the battery bank
Red battery cable includes a built-in 30A DC ATC fuse for circuit protection
PV and battery cables include ferrule ends for faster charge controller connections
The 708-0150 kit is useful for starter RV solar setups where a solar panel or PV array needs to be wired to a charge controller and then to the battery bank. It pairs well with compatible Xantrex solar panels and charge controllers when the cable length, fuse size, and wire gauge are appropriate for the system. Always verify your solar panel current, controller requirements, battery distance, and wire sizing before installation.
• One pair of black/red 20-foot MC4-type PV cables • One pair of black/red 10-foot battery cables • Built-in ferrule terminations for charge controller connections • Battery cable ring terminals • Built-in 30A DC ATC fuse on red battery cable
This kit is designed to connect a solar panel or PV array to a charge controller, then connect the charge controller to the battery bank. Ferrule ends are intended for controller-side wiring connections, while the battery cables include ring terminals for battery connection. Confirm cable length, wire gauge, controller terminal size, battery terminal style, and fuse requirements before installation.
Solar wiring must be sized correctly for panel current, controller rating, cable length, voltage drop, and battery protection requirements. Do not exceed the rating of the cable, fuse, charge controller, or connected solar equipment. Disconnect batteries and cover or disconnect solar panels before wiring. If you are not comfortable with DC electrical work, installation should be handled by a qualified RV or solar technician.
The Xantrex 708-0150 kit includes 10 AWG PV and battery cables for starter RV solar installations, with MC4-type PV connectors, ferrule controller ends, ring terminal battery ends, and a built-in 30A DC ATC fuse on the red battery cable.