Home > Jacks & Levelers > Tongue Jacks >

Fastway Flip 4" Jack Foot 2-1/4"

Fastway Flip 4"
Fastway Flip 4" Jack Foot 2-1/4"


 
Alternative Views:


: $28.96
MFG P/N: 88-00-4500
MFG: Fastway
UPC #: 856301002744
Weight (lbs): 2
Shipping: Free Shipping on Orders $99 or More!

Quantity in Stock       :52

Availability:
In Stock
Product Code: 94-7432
Qty:

Description Instructions
 
Tired of hauling around and stacking up old 2x4s, just so you can get a little more height from your jack?  The new Fastway Flip takes care of those hassles for good.  The Fastway Flip jack foot attaches permanently to the bottom of your jack's inner tube.  As you extend your jack, the Flip jack foot extends down, and locks into place.  When you raise your jack, the Flip jack foot automatically tucks up under the frame and out of the way!  Fits 2 1/4" jack tubes and adds 4".

Fastway Flip 4" Jack Foot 2-1/4"

Additional Product Information
Which Width?
Fastway Flip WidthWithThe Flip jack foot come in two widths. One to fit a 2-1/2" jack, and one to fit a 2" jack. To find out what size jack you have measure the width of your jack above the trailer frame (as shown in the illustraion to the right.) - A 2-1/4" Flip fits almost all standard tongue jacks (95+%).

Which Height?
the trailer hitched as you usually tow: - If there is 8" to 10" from the bottom of the outside jack tube to the ground use a 4" tall Flip jack foot. - If there is more than 10" from the bottom of the outside jack tube to the ground use a 6" tall Flip jack foot. - A 2" Flip fits very small trailers and some electric tongue jacks.

Occasional Low Clearance Situations
If you must drop the trailer in a place where there is not enough clearance below the jack for the Flip jack foot to pivot down properly, the jack may be extended with the jack foot in a horizontal position. A small block of wood placed directly under the inner jack tube will help keep the weight from bending the Flip jack foot.