Home > Electrical > Battery Chargers/Maintainers/Conditioners >

  BatteryMINDer 2012-OBD 12V 2 Amp On Board Charger/Maintainer/Desulfator

BatteryMINDer 12V 2 Amp On Board Charger/Maintainer/Desulfator
BatteryMINDer 2012-OBD 12V 2 Amp On Board Charger/Maintainer/Desulfator


 
Alternative Views:


: $93.99
MFG P/N: 2012-OBD
MFG: BatteryMinder
Weight (lbs): 4
Shipping: Free Shipping

Quantity in Stock       :4


Availability:
In Stock
Product Code: 2012-OBD
Qty:

Description Instructions
 
With the BatteryMINDer 2012-OBD 12V 2 Amp On Board Charger/Maintainer/Desulfator keep your battery charged-maintained without lifting the hood! With all newer vehicles being equipped with an On Board Diagnostic port (OBD), batteries can be both charged and maintained by BatteryMINDer brand maintenance charger – desulfators, without needing to make direct contact with the battery posts or even lifting the hood. The OBD port is normally located under the dashboard above the brake pedal.
  • SAE to OBD2 Connector.
  • Case Type: wall or vehicle mountable.
  • Output Volts (DC): 12v.
  • Output Current (Amps): 2.
  • Input Voltage (AC): 100-240v.
  • Input Current (Amps): .65.
  • Minimum Battery Voltage: 3.
  • Operating Temperature: 14°F - 104°F.
  • SmarTECHnology microprocessor controlled.
  • Safely charges-maintains-conditions all size/type/brands:
    • Flooded/Deep Cycle
    • Maintenance Free/Sealed
  • Diagnostic LED indicators for:
    • power.
    • battery connection.
    • battery weak.
    • load.
    • testing.
    • desulfating.
    • temp compensation.
    • bad cell.
  • Maximizes battery life and capacity, reconditions weak batteries.
  • Automatic high frequency (not high voltage) pulse desulfation (U.S. patented.)
  • Plug ‘n Run operation-no buttons to push.
  • Weatherproof / water and intrusion resistant to International Standard IP65.
  • Maintains up to 6 batteries at a time. (Requires Y-Connectors 210AY (sold separately)).
  • Extremely efficient, low operating costs.
  • Automatic disconnect and resume if AC power is interrupted.
  • Short circuit, spark, polarity and thermal runaway protection.
  • Built-in Battery Condition Indicator.
  • Dimensions: 5.69" L x 4.06"W x 2.13" H.
  • Includes:
    • OBD2 connector plug.
    • 5.5' power cord.
    • 5.5' DC cord.
    • 2' Battery Clip Cord Set with Quick Connector.
  • Manufacturers warranty: 1 Year 100% Money Back Guarantee, 5 Year "No Hassle" Warranty.
Battery Charger Comparison Chart

12V 2 Amp On Board Charger/Maintainer/Desulfator