Cross-frame stabilizing jacks for travel trailers and 5th wheels with low-to-mid frame clearance. 4,500 lb. static capacity each, 22" height. Combines leveling strength with stabilizing steadiness. Crank handle included. PowerPak-compatible. Set of 2.
The BAL 23222 is the second-shortest model in the manual C-Jack series — the 22" size suited for travel trailers and 5th wheels with low-to-mid frame clearance where the 19" model reaches the frame but the extra height of the 25" or larger models isn't needed. At 4,500 lbs. of static capacity per jack, it is one step up from the entry-level 19" in both height and capacity.
Like all C-Jacks, the 23222 operates as a cross-frame pair, with each jack bracing upward against the trailer frame from opposite corners to reduce rocking, sway, and bounce simultaneously. It ships boxed with a crank handle and is fully compatible with the BAL C-Jack accessory family including the 23200 foot pads, 23205 connecting channel, 23216 lock arm, and the 24210 PowerPak 12V motor kit for future conversion to powered operation.
Second-shortest in the C-Jack range — for trailers where 19" reaches but a bit more height is still needed
Cross-frame design applies upward leveling force while simultaneously reducing sway and bounce
Add the BAL 24210 PowerPak 12V motor kit anytime to upgrade to powered operation
Works with BAL 23216 Lock Arm for security and theft deterrence when parked
• 2x BAL 23222 C-Jack (22") • 1x Crank handle Compatible BAL Accessories (Sold Separately): • 23200 — C-Jack Foot Pads, set of 2 • 23205 — 42" Connecting Channel • 23216 — Lock Arm • 24210 — PowerPak 12V Motor Kit Individual replacement jack: • 23122 — Single 22" C-Jack (no handle, no hardware)
Measure your trailer's frame-to-ground clearance before ordering. The jack needs to fit in the retracted space and still extend firmly against the frame. The 22" sits near the lower end of the C-Jack range. If you're unsure between 19" and 22", measure carefully — a jack that bottoms out on the ground before reaching the frame provides no stabilizing benefit. When in doubt, go with the taller size.
The 23222 manual C-Jack is not a replacement for the BAL Powered C-Jack (21100005). If your RV currently has the powered model installed, you need the powered replacement — not this manual version.
All C-Jack models are sold as a set of 2 with a crank handle included. Measure your trailer's frame-to-ground clearance before selecting a size. All sizes accept the BAL 23200 foot pads, 23205 connecting channel, 23216 lock arm, and 24210 PowerPak motor kit.