Tall extended replacement foot pad for BAL tongue jacks with a 2" inner leg diameter. 15" overall height adds ground clearance for lifted trailers or soft terrain. Fits 2,000 lb. and 5,000 lb. BAL tongue jacks. Retaining pin included. Sold individually. Made in the USA.
The BAL 29054 is the tall extended foot pad in BAL's tongue jack accessory family. At 15" overall height, it is the tallest option in the 2" leg pad series — nearly twice the height of the mid-height 29055B and significantly taller than the short-profile 29056B. It is designed for situations where additional ground clearance is needed between the jack foot and the ground, such as highly lifted trailers, severely uneven terrain, or setups where the retracted jack still sits high above the surface.
Like the rest of the BAL tongue jack pad family, the 29054 slips over the 2" inner diameter leg and pins in place with the included retaining pin. The 4" x 8" base pad prevents the jack from sinking into soft dirt, sand, or grass. Compatible with both 2,000 lb. and 5,000 lb. BAL tongue jack models that use a 2" inner tube.
• 1x BAL 29054 Extended Foot Pad • 1x Retaining pin Other BAL 2" Leg Tongue Jack Foot Pads: • 29056 / 29056B — Short pad, ~1/2" height • 29055 / 29055B — Mid-height pad, 7" height • 29054 — Extended pad, 15" height (this item)
The 29054 fits jacks with a 2" inner / 2-1/4" outer leg diameter. BAL's 1,000 lb. tongue jacks use a smaller 1-7/8" inner tube and require the 29050 / 29050B or 29051 extended pad instead. If additional height is not needed, consider the 29056B (short) or 29055B (mid-height) pads for the same 2" leg jack.
All three pads fit BAL tongue jacks with a 2" inner leg diameter and are compatible with both 2,000 lb. and 5,000 lb. jack models. For 1,000 lb. jacks with a 1-7/8" inner tube, see the BAL 29050 / 29050B and 29051 series instead.