Screw-mounted bracket kit for installing a Camco AccuLevel on most fifth wheel kingpin boxes for easy leveling visibility during setup.
The Camco 25583 AccuLevel bracket is designed to mount a Camco AccuLevel to a fifth wheel pin box. This helps position the level where it can be seen more easily while backing, hitching, or setting up the trailer.
This bracket is intended for most fifth wheel king pin boxes and uses a screw-mounted installation. It is useful when adding or relocating an AccuLevel for better visibility during campsite leveling.
Designed for mounting a Camco AccuLevel level
Made for mounting to most fifth wheel king pin boxes
Installs using screw-mounted bracket hardware
Helps position the level where it can be viewed during setup
This listing is for the AccuLevel mounting bracket kit only. The Camco AccuLevel level itself is not included unless otherwise stated. Before ordering, confirm the trailer uses a compatible fifth wheel pin box and that the mounting location has enough flat surface area for installation.
Before Starting: Choose a mounting location on the fifth wheel pin box where the AccuLevel will be visible and where screws can be safely installed without interfering with pin box operation. Basic Installation Steps: 1. Confirm Location: Select a flat, visible mounting area on the king pin box. 2. Test Fit: Hold the bracket and AccuLevel in position to confirm visibility and clearance. 3. Mark Holes: Mark the mounting points using the bracket as a guide. 4. Drill if Required: Drill pilot holes if needed, using care not to damage wiring, components, or pin box structure. 5. Mount Bracket: Secure the bracket using the supplied mounting hardware. 6. Attach AccuLevel: Install the Camco AccuLevel onto the bracket according to the level’s instructions. 7. Verify Reading: Park on a known level surface and confirm the AccuLevel is reading correctly after installation.
Package Contents: • Camco 25583 AccuLevel mounting bracket • Mounting hardware as supplied by manufacturer NOT Included — May Also Need: • Camco AccuLevel level • Drill or screwdriver • Measuring tape or marker • Additional fasteners if the supplied hardware is not suitable for the mounting surface This listing is for the bracket kit only. The AccuLevel level is sold separately unless otherwise stated.
To confirm compatibility before ordering, have the following ready: • Fifth wheel pin box style and available mounting area • Photos of the front or side of the pin box • AccuLevel model being mounted • Preferred visibility location from the tow vehicle mirrors or setup position • Any clearance concerns around the hitch, pin box, or trailer front cap Why this matters: Pin box shapes and available mounting surfaces can vary. Confirming the bracket location helps ensure the level is visible, secure, and does not interfere with hitching or turning clearance.
Match this bracket by Camco AccuLevel use, fifth wheel pin box style, mounting surface, screw clearance, and desired visibility location.
If the mounted level is difficult to read or does not seem accurate, recheck bracket placement, screw tightness, level calibration, and visibility before drilling new mounting holes.