Black exterior RV roof vent cover designed to allow airflow through most standard 14" x 14" roof vents while helping keep rain, insects, and debris out.
The Camco 40443 RV roof vent cover mounts over an existing standard 14" x 14" RV roof vent to help provide ventilation in changing weather. It allows the vent to remain open during light rain or while parked, helping reduce heat buildup and stale air inside the RV.
Its aerodynamic exterior design helps support airflow while traveling, and the removable louvered screen makes cleaning easier. The black UV-stabilized resin construction is designed for outdoor rooftop use on compatible RVs, campers, travel trailers, fifth wheels, motorhomes, and enclosed trailers.
Helps allow ventilation while reducing rain entry through the roof vent
Designed for most standard RV roof vent openings
Helps keep insects and debris from entering through the vent cover
Louvered screen removes for easier cleaning and maintenance
This cover is designed to mount over most standard 14" x 14" RV roof vents. It is not the same as a replacement vent lid, vent dome, garnish ring, fan assembly, or complete roof vent. Before ordering, verify your existing vent size, available rooftop clearance, nearby AC units or roof accessories, hinge/lid travel, and whether your vent lid can still open properly under a cover.
Before Starting: Confirm the existing RV roof vent is approximately 14" x 14" and that the cover will clear nearby roof accessories, AC units, antennas, solar panels, racks, and the vent lid when opened. Basic Installation Steps: 1. Inspect the Roof Vent: Check the existing vent frame, lid, hinge, sealant, and surrounding roof area for cracks, damage, or leaks. 2. Test Lid Movement: Open the vent lid and confirm there is room for it to operate under a roof vent cover. 3. Position the Cover: Place the cover over the vent and confirm alignment, airflow direction, and rooftop clearance. 4. Mark Mounting Points: Follow the included instructions to mark the mounting bracket or hardware locations. 5. Install Hardware: Attach the cover using the supplied hardware, taking care not to damage the vent frame or roof membrane. 6. Check Security: Confirm the cover is secure and does not interfere with the vent lid, fan, or nearby roof accessories. 7. Inspect Seal Areas: Make sure any roof penetrations or mounting points are properly sealed as needed for the roof type. 8. Clean Periodically: Remove louvers as needed to clean dust, insects, leaves, or debris.
Package Contents: • 1 Camco 40443 black RV roof vent cover • Built-in insect screen / removable louver assembly • Mounting hardware as supplied by manufacturer NOT Included — May Also Need: • Replacement roof vent lid • Complete roof vent assembly • Interior garnish ring • Fan motor, fan blade, switch, or powered vent components • Roof sealant or compatible lap sealant • Replacement vent frame hardware • Installation tools This listing is for the exterior vent cover only unless otherwise stated. Confirm whether your repair requires a cover, a lid, or a complete roof vent assembly before ordering.
To confirm this vent cover is right for your setup, consider the following: • Existing roof vent opening size • Vent lid size and how far it opens • Roof accessory clearance around the vent • Whether the roof vent has a powered fan or manual crank • Whether you need a cover, replacement lid, or complete vent assembly • Roof membrane type and compatible sealant needs • Whether black is the desired exterior color Why this matters: Roof vent covers, vent lids, and complete roof vents are different parts. Matching the correct part type helps avoid returns and installation issues.
Match this roof vent cover by vent size, part type, rooftop clearance, lid travel, color, and installation requirements. Do not select it as a replacement for a cracked vent lid.
If ventilation or fitment issues continue, inspect roof vent size, lid travel, cover alignment, louver cleanliness, mounting hardware, sealant, and nearby roof clearance.
Use proper roof safety precautions when installing or servicing this vent cover. Do not walk on unsupported roof areas, and use sealants compatible with the RV roof membrane. Do not overtighten mounting hardware, as plastic parts or vent frames can crack. This product is for exterior RV roof vent coverage only and is not a structural roof component, replacement vent lid, or complete vent assembly.