Set of 2 heavy-duty scissor stabilizing jacks for travel trailers, pop-up campers, and other large vehicles. 5,000 lb. certified capacity per jack. Adjusts from 4-3/8" to 23-3/4". Powder-coated steel. Bolt-on or weld-on installation. Power drill socket included.
The Camco Eaz-Lift 48820 is a set of two 24" scissor stabilizing jacks for travel trailers, pop-up campers, and other large vehicles. They mount directly to the trailer's underbody frame — bolt-on or weld-on — and extend downward to brace against the ground, stabilizing the trailer against rocking and movement when parked. With a certified 5,000 lb. static capacity per jack and a travel range of 4-3/8" to 23-3/4", they cover the full range of trailer frame heights in one purchase.
The jacks are built from heavy-duty steel with a powder-coated finish for corrosion resistance, and a scissor jack socket for a power drill is included alongside the standard crank handle — letting you raise and lower them quickly at the campsite with a cordless drill rather than cranking by hand. The 24" model is the mid-range in Eaz-Lift's scissor jack lineup, sitting between the 20" (48800) and 30" (48840) options.
Certified 5,000 lb. static load capacity each — heavy-duty rating for travel trailers and large campers
Wide adjustment range covers the full spectrum of trailer frame heights without needing a different jack size
Power drill adapter lets you raise and lower jacks quickly with a cordless drill — no hand cranking required
Flexible installation method — attach to the trailer frame using whichever method suits your setup
• 2x Eaz-Lift 24" Scissor Stabilizing Jacks • 1x Scissor jack socket for power drill • Mounting hardware Recommended accessories (sold separately): • Jack foot pads — for soft ground or gravel surfaces to prevent sinking
These are stabilizing jacks — designed to reduce movement and rocking on an already-leveled, already-parked trailer. They are not intended to lift the full weight of the trailer off its tires or wheels, and are not a substitute for wheel chocks during the leveling process. Correct sequence: Level the trailer with wheel chocks and leveling blocks first, then deploy the scissor jacks for fine stabilization.
All three models are sold as a set of 2 with a drill socket included: • 48800 — 20" jack, 4-3/8" to 19-3/4" travel, 5,000 lb. each • 48820 — 24" jack, 4-3/8" to 23-3/4" travel, 5,000 lb. each (this item) • 48840 — 30" jack, 4-3/8" to 29-3/4" travel, 5,000 lb. each Choose based on your trailer's frame-to-ground clearance. The jack needs to fit in the retracted space and extend firmly to the ground. When in doubt, go with the taller model.