Designed specifically for portable tote tank use, this RhinoFLEX kit gives you a secure, odor-tight connection between your RV dump valve and your tote tank. The 4-prong bayonet lug system locks positively onto standard lug fittings -- no guessing, no drips, no smell. A compact 19-inch compressed length and 23 mil steel-wire-reinforced polyolefin construction make this kit tough enough for regular use and easy enough to store in a compartment when you're done.
Running a tote tank without the right hose kit is a recipe for awkward angles, kinked hose, and leaking connections. The Camco RhinoFLEX 39768 kit was built to solve exactly those problems. The low-profile 90-degree elbow creates a downhill flow path right at the tank inlet, keeping gravity working for you and eliminating the sharp bends that cause kinks in standard straight fittings.
The translucent 90-degree elbow lets you see flow, so you know the line is clear. Swiveling bayonet fittings on both the elbow and the hose ends make connecting and disconnecting fast even when you're working in a tight space under the RV or beside the tote tank.
Both ends lock onto standard lug fittings with a positive rotational click. Swivel design allows easy alignment without twisting the hose body.
Promotes downhill flow directly at the tote tank inlet, reduces kinking risk, and keeps the connection streamlined against the tank.
Heavier-wall construction than basic RV hose. Steel wire reinforcement holds the shape under compression and resists crushing.
Two end caps are included so both ends seal up after use, keeping the hose clean and odor-contained during transport and storage.
The 90-degree elbow is molded from UV-stabilized resin, which resists the yellowing and brittleness that affect standard clear plastic in direct sunlight. The translucency is intentional -- you can visually confirm flow is moving and the line is not clogged, which is especially useful when draining a tank that has been sitting.
Covered by Camco's limited 90-day manufacturer warranty against defects in materials and workmanship.