Home > Appliances > Air Conditioners >

Coleman Mach 37204-079 Mach 8 Plus 15,000 BTU Ultra-Low-Profile RV Rooftop Air Conditioner, Textured Black

Coleman Mach 37204-079 Mach 8 Plus 15,000 BTU ultra-low-profile RV rooftop air conditioner in textured black finish
Coleman Mach Mach 8 Plus Air Conditioner, 15,000 BTU, Black
 
Alternative Views:


List Price: $1,864.89
: $1,500.99
You save $363.90!
Part Number: 37204-079
Manufacturer: Coleman Mach

Quantity in Stock :35

Free Shipping
Availability: In Stock
Qty:

 
Coleman Mach 15,000 BTU Ultra-Low-Profile
Coleman Mach 8 Plus Rooftop Air Conditioner -- 37204-079 -- Textured Black

The Mach 8 Plus is Coleman Mach's premium ultra-low-profile rooftop air conditioner, engineered to deliver serious cooling power without the tall, boxy profile that creates wind resistance at highway speeds. A dual-motor design keeps airflow -- and BTUs -- consistent whether you're running on high or low speed, so you're not sacrificing comfort to save a few amps.

Full 15,000 BTU Cooling in a Streamlined, Fuel-Friendly Profile

Most high-BTU rooftop units are tall and boxy. The Mach 8 Plus changes that equation with an ultra-low-profile shroud that reduces aerodynamic drag at highway speeds, which translates directly to better fuel economy on long hauls. If you're a full-timer or frequent traveler, that difference adds up fast.

What sets the Mach 8 Plus apart from single-motor competitors is its dual-motor design. Many RV air conditioners cut fan speed -- and effective cooling capacity -- when you drop from high to low. The Mach 8 Plus uses two dedicated motors so both speed settings deliver the full 15,000 BTU rating. You get quieter operation on low without giving up cooling performance.

The textured black finish (part number 37204-079) is a factory color option designed for rigs with black or dark-colored roofs, or for owners who simply prefer a blacked-out roofline look over the standard polar white.

Ultra-Low Profile

Reduced height shroud cuts wind drag at highway speeds for measurably better fuel efficiency compared to standard-height units.

Dual-Motor Design

Two motors -- one for the compressor fan, one for the blower -- deliver full 15,000 BTU output on both high and low speed settings.

15,000 BTU Cooling

Handles large Class A, C, and fifth-wheel interiors up to approximately 400-450 sq ft when paired with proper insulation.

Textured Black Finish

Factory-molded textured black ABS shroud -- not painted -- for durability and UV resistance on dark-roofed rigs.

Aerodynamic Advantage

The Mach 8 Plus profile sits lower than standard Coleman Mach units, reducing the frontal area exposed to highway wind. For Class A and Class C motorhome owners who travel frequently, a lower-drag rooftop AC can recover fuel costs over a full season of driving. This is a real engineering difference, not a marketing claim -- Coleman Mach publishes CFD (computational fluid dynamics) data supporting the profile design.

Ducted and Non-Ducted Compatibility

The 37204-079 rooftop unit (condenser/evaporator assembly) is designed to mate with Coleman Mach's standard 14-inch x 14-inch RV roof opening. It is compatible with both ducted ceiling assemblies (air distributed through ceiling ducts) and non-ducted ceiling assemblies (air discharged directly from the ceiling unit). The ceiling assembly/air distribution kit is sold separately -- confirm your existing ceiling assembly is compatible before ordering.

Ceiling Assembly and Control Required

This listing is for the rooftop condenser/evaporator unit only. A matching Coleman Mach ceiling assembly (air distribution box) and a compatible thermostat or control board are required for a complete, functional system. If you are replacing an existing Mach 8 or Mach 8 Plus, your existing ceiling assembly and thermostat may be reusable -- verify compatibility by comparing the ceiling assembly part number.

Installation and Maintenance Tips

  • Always replace the foam gasket (Mach standard 14-inch gasket) between the rooftop unit and the roof during installation -- a degraded gasket is the most common cause of water intrusion around rooftop ACs.
  • Torque the four roof bolts evenly to avoid distorting the mounting flange -- follow the Coleman Mach installation sheet for sequence and torque spec.
  • Clean the condenser coil fins each spring season with a fin comb and low-pressure water rinse to maintain full BTU output.
  • Inspect the shroud latches and mounting screws annually -- UV exposure can make plastic brittle over time.
  • A dedicated 30-amp circuit is required. Do not run a 15,000 BTU unit on an undersized shore power connection or generator.

Electrical Specifications

Cooling Capacity15,000 BTU/hr
Operating Voltage115V AC, 60 Hz
Compressor Amperage (High)Approximately 12.5-13.5 A (typical for 15K Mach 8 series)
Fan Motor ConfigurationDual motor (condenser fan + evaporator blower -- separate motors)
Minimum Circuit Ampacity20 A dedicated circuit (30-amp shore power recommended)

Physical Specifications

Roof Opening Required14 in x 14 in (standard RV roof opening)
Shroud ProfileUltra-low-profile (reduced height vs. standard Mach units)
Shroud Color / FinishTextured black (UV-stabilized ABS)
Mounting Bolt PatternColeman Mach standard 4-bolt, 14 x 14 in opening

Part and Model Information

ManufacturerColeman Mach (a Airxcel brand)
Part Number37204-079
SKU09-7174
Vendor Part Number08-8493
Product LineMach 8 Plus
ColorTextured Black

Compatibility and Fitment

Roof OpeningFits standard 14 in x 14 in RV roof cutout
Ceiling AssemblyCompatible with Coleman Mach ducted and non-ducted ceiling assemblies (sold separately)
Thermostat / ControlCompatible with Coleman Mach analog and digital thermostats (sold separately)
Replaces / UpgradesDirect upgrade path from earlier Mach 8 and standard Mach 15 rooftop units sharing the 14 x 14 in footprint

What Is Included

IncludedRooftop condenser/evaporator assembly with textured black shroud
Not IncludedCeiling assembly / air distribution box, thermostat or control board, roof gasket (recommend replacing), mounting hardware (verify against your existing hardware)

Important Information

  • This is the rooftop unit only -- a ceiling assembly and thermostat are required for a complete system and are sold separately.
  • Requires a dedicated 20-amp minimum (30-amp recommended) 115V AC circuit. Running on an undersized circuit will trip breakers and can damage the compressor.
  • Always replace the roof-to-unit foam gasket during installation to prevent water leaks -- reusing an old compressed gasket is a leading cause of ceiling water damage in RVs.
  • Not compatible with 12V DC-only systems -- this is an AC-powered unit requiring shore power or a generator of sufficient capacity.
  • Roof structural integrity must support the weight of the rooftop unit -- verify your roof can handle the load before installation, particularly on older or fiberglass-roof units.
  • Installation should be performed by a qualified technician if you are not comfortable working on an energized RV roof system.


Browse for more RV Accessories in the same category as this item:

Appliances > Air Conditioners
Appliances


$28.90
$85.99
$9.36
$6.64