Home > Jacks & Levelers > Bigfoot Hydraulic Leveling Systems >

Bigfoot QEZ-12F EZ Flip 4 Pt System
Bigfoot EZ Flip 4 Pt System
Bigfoot QEZ-12F EZ Flip 4 Pt System


 
Alternative Views:


Normally: $1,860.95
MFG P/N: QEZ-12F
MFG: Quadra Mfg
Weight (lbs): 187



Availability:
Ships in 7-10 Business Days
Product Code: QEZ-9F
Qty:

DESCRIPTION Instructions
 
The Bigfoot QEZ-12F EZ Flip 4 Pt System incorporates the EZ Manual System with the Fastway Flip, a mechanism that flips and locks in both the retracted & extended position for increased ground clearance on most travel trailers.
  • Unique "flip" mechanism attached to the bottom of each cylinder that drops down during operation to gain both ground clearance during traveling and lift height during system operation.
  • Convenient wireless control that allows the operator to walk around the vehicle or the campground to operate his system.
  • Control operates the jacks in pairs to resist frame twist or slide-out damage.
  • Four powder coated cylinders capable of lifting 12,000 per cylinder with 12" of stroke not including the gained height from the flip mechanism.
  • One weatherproof hydraulic power unit with an American made marine pump & motor wrapped in a steel housing, allows the unit to be mounted outside in the elements so it does not take up storage space.
  • NOTE: Flip systems are designed for trailers with a total weight of under 7,000 lb.
  • System includes the EZ Wireless control, 4 jacks & one EZ Tank Assembly, 12' & 14' hoses and 3 x 7 weld on mounting brackets.
  • Made in America.
Measurement for Fitment: Check frame height! Measure from the ground (on level surface) to the bottom of the floor along the frame (as high as the cylinder could go). Measure this for both jack locations, typically near the front of the trailer and behind the rear axle(s). If this measurement is between 24"-30" this part number should work (as long as there is room on the frame for the cylinders). If this measurement is less than 24" this will NOT work on your trailer. If the measurement is 30" or greater, you can use part #QEZ-12F for longer cylinders up to a 35" frame height.

Bigfoot Leveling System EZ Flip 4 Pt System