Valved, non-keyed female coupler designed for the Flow-Rite BA-MS-700 gravity fill tank. Delivers a secure, tool-free quick-connect for RV and marine battery watering systems -- push to connect, press the release button to disconnect.
The Flow-Rite BA-QDV-232 is the matched female coupler for the BA-MS-700 gravity fill tank used in Flow-Rite single-point battery watering systems. If you are running a Flow-Rite watering kit on a flooded lead-acid battery bank -- common in RV house battery bays, golf cart bays, and marine engine compartments -- this is the female-side connector that joins the gravity tank hose to the male coupler on your watering system manifold.
The coupler is valved, meaning it seals automatically when disconnected so fluid does not spill or drip during tank removal or reconnection. The non-keyed design means it mates with standard non-keyed male couplers without any orientation requirement -- just push until it clicks.
The 1/2" barb outlet accepts standard 1/2" ID tubing, which is the hose diameter used throughout the Flow-Rite BA-series single-point watering manifold system.
Internal valve seals automatically on disconnect -- no drips, no spills during tank swap or system service.
Accepts standard 1/2" ID hose. Matches the tubing used throughout Flow-Rite BA-series manifold kits.
Mates with standard non-keyed male couplers. No alignment required -- push to connect, button to release.
Factory-specified female coupler for the Flow-Rite BA-MS-700 gravity fill tank used in single-point watering systems.
Flow-Rite single-point watering systems replace the individual cell caps on a flooded lead-acid battery bank with a manifold of flow-control valves and tubing. One fill point -- typically connected to a gravity tank or pump -- tops off every cell simultaneously to the correct level. The BA-QDV-232 is the coupler that connects the gravity tank's output hose to that fill manifold. Proper water level maintenance extends battery life significantly in RV house banks, solar storage banks, and golf cart packs.
This coupler is the female half of the quick-disconnect used on the Flow-Rite BA-MS-700 gravity fill tank. The BA-MS-700 tank is sold separately and mounts above the battery bank; distilled water gravity-feeds through the connected tubing when the coupler is engaged. The BA-QDV-232 is the replacement or spare coupler for that tank's hose outlet. If your existing coupler is cracked, leaking, or missing, this is the direct replacement.
Flow-Rite offers both keyed and non-keyed coupler sets. Keyed couplers include an alignment tab to prevent cross-connection between incompatible fluid systems. The BA-QDV-232 is non-keyed. Before ordering, confirm your existing male coupler is also non-keyed. Mixing a keyed male with a non-keyed female (or vice versa) will prevent proper connection. Check the part number on your current coupler or the original kit documentation to verify.