Keep your Furrion LIT speaker charged and ready without hunting for cables. This dedicated 12V dock slides the speaker in for wireless charging in about 3 hours, and adds two USB ports on the side so you can top off a phone or tablet at the same time. Mounts on a tabletop or wall -- mounting hardware is included.
The Furrion FBS012NCU is the factory-matched charging cradle for the Furrion LIT portable Bluetooth speaker. Drop the speaker into the cradle and wireless inductive charging begins automatically -- no cables to plug into the speaker itself. The dock runs off a standard 12V DC connection, making it a natural fit for RV interiors where 12V power is always available at the fuse panel or a dedicated outlet.
Two USB-A charging ports on the sides of the dock let you charge a phone or tablet simultaneously, so the dock doubles as a small charging hub at your entertainment center or nightstand. A two-wire 12V hardwire connection keeps the install clean. Supersedes legacy part number 720164.
Slide-in inductive charging -- no cable needed at the speaker. Fully recharges the LIT speaker in approximately 3 hours.
Two USB-A ports on the side for charging phones, tablets, or other USB devices while the speaker charges.
Two-wire connection to 12V DC -- works directly with RV house power, no inverter or AC adapter required.
Mounting hardware included for tabletop use or wall installation. Clean, permanent fit in galley, bedroom, or lounge.
The LIT speaker is designed to go with you -- hiking, kayaking, campfire -- and this dock is where it lives and recharges when you're back in the rig. Hardwired to 12V, it's always ready when you are, with no wall-wart to lose and no cord to fish to the speaker.
The dock uses a simple two-wire 12V hookup -- positive and negative to a 12V fused circuit. No complex wiring required. Choose tabletop or wall mount based on your interior layout, use the included hardware, and the cradle is ready to accept the speaker. The inductive charging pad inside the cradle activates when the speaker is seated correctly.
Recommended fuse size: follow the vehicle or chassis wiring standards for low-current 12V accessories. A 5A fuse on the positive wire is typical for this type of dock. Turn off 12V house power before making wiring connections.