Purpose-built for RV patios, decks, marine cockpits, and any outdoor entertainment space that takes a beating from weather, sun, and road vibration. The Jensen MSX60RVR pair delivers clear, full-range audio through a polypropylene woofer and titanium dome tweeter rated to IPX6 -- meaning it can take direct water jet exposure without losing performance.
Most budget outdoor speakers are merely water-resistant -- the MSX60RVR is rated IPX6 and independently tested to ASTM B117 salt spray and ASTM D4329 UV exposure standards. That means this pair is engineered to handle coastal salt air, extended sun exposure, and direct hose-down cleaning without degrading over time.
The 6.5" coaxial design puts the titanium dome tweeter at the center of the polypropylene woofer cone, giving you a wide, even dispersion pattern ideal for open-air listening on a camp pad or awning deck. With a 65Hz-20kHz frequency response and 88dB sensitivity at 1W/1M, these speakers perform well even driven by a modest head unit or portable amplifier.
Withstands sustained, high-pressure water jets from any direction. Tested to ASTM B117 salt spray standard for coastal and marine use.
Polypropylene cone and housing tested to ASTM D4329 UV exposure standard. Resists fading, cracking, and warping under prolonged sun exposure.
Handles up to 75 watts max per speaker. Compatible with a wide range of head units and amplifiers common in RV and marine audio systems.
Titanium dome delivers crisp highs without the harshness of mylar designs. Coaxial placement ensures the highs and mids arrive from the same point source.
These speakers are a natural fit for mounting in RV exterior speaker bays, under awning overhangs, on pontoon boats, golf carts, UTVs, and outdoor kitchens. The 5-1/4" mounting hole diameter is one of the most common cutout sizes in RV exterior speaker locations, making these a straightforward drop-in replacement for many factory-installed units.
At only 2.4 lbs per pair and 2-3/8" mounting depth, installation is manageable even in shallow exterior wall cavities. The 7-1/8" grille diameter provides enough overlap to cover most existing cutouts cleanly.
For those building a custom enclosure or integrating into an amplified system, the published Thiele-Small parameters allow accurate enclosure modeling: