Replace or extend your RV propane connection with confidence. The JR Products 06-0131 is a factory-style 60-inch rubber pigtail hose that connects your LP tank's POL valve to your coach's 1/4" inverted flare supply line. UL and CSA listed for safety-critical LP fuel service.
The 06-0131 is a direct-replacement propane pigtail hose built to OEM specifications for recreational vehicles, travel trailers, fifth wheels, and motorhomes that use a POL-style cylinder valve. At 60 inches (5 feet) of flexible rubber hose, it gives you enough reach to connect horizontally or vertically mounted ASME tanks and standard 20 lb or 30 lb DOT cylinders without straining the fittings.
One end terminates in a POL (Prest-O-Lite) left-hand-thread fitting that threads directly into your propane tank valve -- no wrench flats, hand-tightened by design. The other end is a 1/4" male inverted flare for connection to a regulator inlet or the coach's hard-line supply fitting. Both ends are standard in the RV industry and compatible with most two-stage and single-stage LP regulators.
Left-hand-thread POL end fits standard 20 lb, 30 lb, and ASME propane cylinders with POL-style valves. Hand-tighten only -- no sealant required.
Right-angle or straight 1/4" male inverted flare end connects to most RV LP regulators and inline fittings without adapters.
Five feet of pliable rubber hose allows routing around tank compartment walls and regulator brackets without kinking or stressing connections.
Independently tested and listed to UL and CSA standards for LP gas service -- meeting codes required by most RV manufacturers and campground inspections.