Genuine Lippert trailer double-eye leaf spring with 4,000-lb capacity, 7-leaf steel construction, 1-3/4" spring width, 26" load length, and 24-7/8" unloaded eye-to-eye length. Designed to replace a worn, flattened, cracked, or damaged spring on compatible trailer suspension systems.
The Lippert 2021095282 is a replacement double-eye trailer leaf spring for compatible RV and trailer suspension systems. It is built with a 7-leaf steel design to help absorb road shock, support the trailer suspension, and restore ride quality when the original spring is worn or damaged.
This spring is rated for 4,000-lb capacity and measures 1-3/4" wide with a 24-7/8" unloaded eye-to-eye length. It includes pre-installed nylon bushings and is designed for double-eye trailer suspension setups using matching hangers, equalizers, shackle links, and mounting hardware.
Replacement spring for compatible RV and trailer double-eye suspension systems
Designed for trailer suspension applications requiring a matching 4,000-lb spring rating
Multi-leaf steel construction helps absorb road shock and suspension movement
Unloaded eye-to-eye length measures 24.875" with a 26" load length
Trailer leaf springs are not universal by capacity alone. Before ordering, confirm the spring type, capacity, spring width, eye-to-eye length, load length, and suspension hardware match the spring being replaced. This listing is for the leaf spring only. Hanger kits, equalizers, shackle links, wet bolts, U-bolts, axle hardware, and bronze bushings are sold separately.
Lippert lists this spring with a 26" load length and a 24-7/8" unloaded eye-to-eye length. When matching a replacement spring, use the unloaded eye-to-eye measurement whenever possible. A worn or flattened spring may measure longer than a new unloaded spring, so also compare the original spring capacity, leaf count, spring width, axle rating, and manufacturer part number.
1. Secure Trailer: Park on a level surface, chock the wheels, and safely support the trailer frame before working on the suspension. 2. Remove Old Spring: Remove the wheel and disconnect the spring from the hanger, shackle, and suspension hardware as required. 3. Inspect Hardware: Check hangers, shackles, equalizers, bolts, bushings, and U-bolts for wear or damage before installing the new spring. 4. Install Replacement Spring: Position the new double-eye spring in the same orientation as the original and secure it with compatible suspension hardware. 5. Verify Suspension Alignment: Confirm that the spring seats properly, hardware is tightened to specification, and the suspension moves correctly before towing. Trailer suspension service affects towing safety. Installation should be performed by a qualified trailer or RV technician if proper tools and procedures are not available.
• (1) Lippert Double-Eye Leaf Spring
Lippert Customer Support: Phone: 432-LIPPERT (432-547-7378) Website: lippert.com For fitment help, compare the original spring label, spring measurements, axle rating, and suspension hardware before ordering.