Keep your slide room moving smoothly with the correct OEM-specification replacement rod from Lippert. Part 101269 is an 11-inch by 1-inch rod designed specifically for Lippert above floor slide-out assemblies. If your slide room is binding, showing uneven travel, or a rod has become bent or worn, this is the direct replacement to restore proper function.
Lippert Components is one of the most widely used slide-out system manufacturers in the RV industry, with above floor slide-out assemblies found across hundreds of coach models from brands including Forest River, Coachmen, Keystone, Heartland, and many others. When a slide rod wears, bends, or corrodes, the entire slide mechanism can lose smooth travel or seize -- leading to costly service calls if not addressed promptly.
Part 101269 replaces the 11 in. x 1 in. rod in the above floor slide-out linkage. Using the correct-length, correct-diameter rod ensures the geometry of your slide mechanism remains true to OEM specification, protecting the rack, motor, and seal system from premature wear.
Exactly 11 inches long and 1 inch in diameter -- matched to the original Lippert above floor slide-out assembly specification to maintain correct travel geometry.
Designed as a drop-in replacement for worn, bent, or corroded rods in Lippert above floor slide-out systems. No modification required when replacing like for like.
Above floor Lippert slide-out systems are found across a wide range of RV brands and model years. Confirm your current rod length and diameter before ordering.
Sourced directly through Lippert Components, ensuring material and dimensional compliance with the original system design.
A bent or worn slide rod puts side-loading stress on the slide motor, rack and pinion gear, and room seals. Replacing a failed rod quickly prevents cascading damage to more expensive components in the slide assembly.
Lippert manufactures both above floor and under floor slide-out systems -- they are not interchangeable. The above floor system routes its drive mechanism along the room floor level, and the rods used are specific to that configuration. Confirm you have an above floor system before ordering this part.
Lippert above floor slide-out assemblies use rods in multiple lengths and diameters depending on room width and coach configuration. Measure your existing rod (or reference your slide-out assembly documentation) to confirm 11 in. x 1 in. is the correct size for your specific application. Ordering the wrong size rod will result in incorrect slide travel geometry.