When your awning fabric is cracked, faded, or torn, replacing the fabric is far more cost-effective than replacing the entire awning assembly. The Lippert V000334364 is a factory-quality 13.5-oz vinyl replacement fabric engineered to fit 13 ft Solera, Dometic, and Carefree awning assemblies. Black Fade color on the exterior gives your rig a clean, modern look while the white underside reflects heat and brightens your outdoor living space.
Lippert sources this fabric to the same specifications used on new Solera awning assemblies. At 13.5 oz per square yard, this is a heavy-duty vinyl that resists UV degradation, wind fatigue, and moisture infiltration better than lighter aftermarket alternatives. Heat-welded seams eliminate the stitched weak points that are the first place cheaper fabrics fail in rain and repeated rolling cycles.
The Black Fade colorway transitions from a rich black at the roller edge to a lighter shade toward the lead rail, a popular aesthetic on modern Class A, Class C, and fifth-wheel rigs. The exterior face provides UV and weather protection; the white underside keeps the space beneath the awning bright and cooler in direct sun.
Heavy-duty commercial-grade vinyl resists UV rays, cracking, and moisture better than standard 11-oz fabrics used in economy replacements.
Thermally fused seams are stronger and fully leak-resistant -- no needle holes to let water seep through under pressure.
Fabric remains flexible in sub-zero temperatures, preventing cracking when the awning is rolled in cold-weather camping or winter storage situations.
An integrated poly cord runs the length of the fabric for an optional LED light strip -- a popular upgrade for evening use. Light track and LED lights sold separately.
This fabric is cut to a finished width of 12'1" and is designed to fit a 13 ft awning assembly. This is intentional and correct -- replacement awning fabric is always cut approximately 11 inches shorter than the nominal awning width to account for the end caps and roller hardware. If your awning assembly measures 13 ft rail-to-rail, this is the right fabric.
The fabric has an 8 ft projection -- this is the distance the awning extends outward from the side of the RV when fully deployed. Verify your existing fabric's projection before ordering if you are unsure.
Lippert designed this fabric to work across multiple awning platforms that share the same roller tube and lead rail dimensions. Confirmed compatible assemblies include:
If you are replacing fabric on a Dometic or Carefree unit, confirm the roller tube end-cap style and lead rail channel accept a standard fabric insert before ordering. Most Dometic and Carefree assemblies from the past 15 years are compatible.
Replacing awning fabric is a two-person job on most RV awning assemblies. The general process involves releasing the spring tension on the roller tube, sliding the old fabric out of the roller groove and lead rail channel, feeding the new fabric in, and re-tensioning the spring. Lippert and most awning manufacturers provide step-by-step videos for their specific roller tube styles.