Lippert Tire Linc PRO RV TPMS -- 2-Tire Sensor Kit with Dock and Repeater
Know your tire pressure and temperature before a blowout ruins your trip. The Lippert Tire Linc PRO delivers continuous, real-time monitoring directly to your smartphone -- no dedicated display unit required. This 2-tire kit is the starting point for Class B vans, toad vehicles, boat trailers, and single-axle RV applications, and it expands to cover more tires as your setup grows.
Tire failures are the leading cause of RV roadside emergencies. Under-inflation generates heat and causes premature sidewall fatigue; over-inflation from a hot highway run can push a tire past its rated pressure. The Lippert Tire Linc PRO watches both -- pressure and temperature -- continuously while you roll, and alerts your phone the moment either reading moves outside safe limits.
The PRO version of the Tire Linc system adds Bluetooth connectivity, a dock that bridges your sensors to a smartphone app, and a repeater that extends wireless range across longer rigs. The external screw-on sensors thread directly onto the valve stem, so installation takes minutes without removing wheels or visiting a tire shop.
Continuous PSI monitoring for each tire with customizable high and low alert thresholds set in the app.
Tracks tire temperature alongside pressure -- rising heat is often the first sign of bearing or brake trouble.
The dock pairs sensors to your phone via Bluetooth; the repeater boosts signal range for larger rigs and slide-outs.
Start with 2 tires and add individual sensors to monitor up to 22 tires on a single account -- ideal for multi-axle coaches or fifth wheels towing a car.
External stem-mount sensors thread onto standard Schrader valve stems in seconds -- no tire dismount, no TPMS relearn procedure, no dealer visit. Each sensor doubles as a locking valve cap, sealing the stem while it monitors. Replacement sensors are available individually, so you never have to replace the whole kit when a battery runs out or a sensor is lost.
The Lippert Tire Linc PRO pairs with the Tire Linc app (iOS and Android). Once configured, the app displays a real-time dashboard showing pressure (PSI) and temperature (F) for every monitored tire. You set your own alert thresholds -- for example, alert at 85 PSI high and 65 PSI low on a steer axle rated for 80 PSI cold -- and the app pushes notifications the moment a reading crosses the line. The dock keeps Bluetooth range practical inside a moving cab, while the repeater handles the rear tires on fifth wheels, Class A coaches, and tag-axle rigs.
The dock alone covers most Class B and Class C rigs where the cab is within typical Bluetooth range of all tires. For Class A motorhomes, fifth wheels, and rigs longer than approximately 35 feet, position the repeater midship or toward the rear to ensure reliable signal from the rear axle sensors. The repeater plugs into a standard 12V outlet or USB power source.
Each external sensor runs on a standard CR-1632 lithium coin cell. Typical battery life is 1 to 2 years depending on transmission frequency and temperature. The app displays a low-battery warning before a sensor goes dark. Replacement CR-1632 cells are widely available at hardware, electronics, and auto parts stores. Sensor replacement is a simple unscrew-and-replace operation -- no tools required.
This 2-tire kit is intentionally a starting point. Lippert sells individual Tire Linc PRO sensors separately, letting you add coverage for a second axle, a dually rear pair, a tow vehicle, or a trailer one sensor at a time. One dock and one repeater supports the full expanded system -- you do not need additional docks as you add sensors. The app supports up to 22 sensors per account, making this kit a practical choice even if your current rig only has two tires, knowing you can scale up later.
Add individual Lippert Tire Linc PRO sensors (sold separately) to expand coverage to a 4-tire or 6-tire setup. No additional dock or repeater is required for most configurations.