Replace faded, torn, or cracked awning fabric without replacing the entire awning assembly. This Lippert Solera OEM-quality vinyl fabric is cold-crack tested to -25F, features heat-welded seams, and drops into your existing 12 ft. awning roller -- saving you the cost of a full unit replacement.
The Lippert V000334361 is a direct-fit replacement awning fabric engineered for Solera awning systems and cross-compatible with leading brands including Dometic and Carefree. At 13.5 oz per square yard, this heavy-duty vinyl holds up against UV exposure, wind loading, and seasonal temperature swings that would crack lesser materials.
The Blue Fade colorway features a gradient pattern on the exterior with a clean white underside -- reducing heat absorption inside the awning shade area. A poly cord sewn into the valance hem gives you a ready-made track for optional LED rope lights (light track and lights sold separately).
Heavy-duty vinyl fabric resists UV degradation, mildew, and road grime. Substantially more durable than standard 8-9 oz residential awning materials.
Fabric stays pliable and crack-free in extreme cold -- important for RVers who store or travel in northern climates during shoulder seasons.
Seams are thermally fused rather than stitched, eliminating needle holes where water can wick through. Critical stress points are reinforced for long-term patio use.
An integrated poly cord runs the valance hem, letting you add compatible LED rope light tracks without additional hardware or modification.
This fabric is designed to fit Lippert Solera awning roller assemblies and is also compatible with Dometic and Carefree 12 ft. awning systems. The 11'1" fabric width is intentionally sized approximately 11 inches shorter than the nominal awning width -- this is correct and accounts for the roller end caps and hardware on both sides. Do not order a 12 ft. fabric expecting a 12 ft. measurement edge to edge.
Awning fabric sizing is based on the nominal awning assembly width, not the fabric measurement itself. This fabric is listed as fitting a 12 ft. awning assembly. The actual fabric width measures 11'1" -- approximately 11 inches less than the nominal size. This is standard across all major awning fabric manufacturers and accounts for the end cap hardware on each side of the roller tube.
To confirm fitment, measure your existing roller tube from end cap to end cap (or fabric edge to fabric edge on your current material). If your existing fabric measures approximately 11'1" wide and has an 8 ft. projection (the depth front-to-back when fully extended), this is your replacement.
This replacement fabric is manufactured to order. It cannot be returned once the order is placed. Measure your awning carefully before purchasing. If you are unsure of your size, verify against your existing fabric dimensions and awning model number before ordering.