Home > LP Gas > LP Regulators >

MB Sturgis 108072-MBS 30 PSI High Pressure LP Gas Regulator, Single Stage, 1/4" Female NPT Inlet x 1/4" Female NPT Outlet

MB Sturgis 108072-MBS 30 PSI High Pressure LP Gas Regulator, Single Stage, 1/4" Female NPT Inlet x 1/4" Female NPT Outlet
MB Sturgis 30 PSI High Pressure LP Gas Regulator, Single Stage, 1/4" Female NPT Inlet x 1/4" Female NPT Outlet
 
Alternative Views:


List Price: $42.18
: $30.49
You save $11.69!
Part Number: 108072-MBS
Manufacturer: MB Sturgis

Quantity in Stock :30

Availability: In Stock
Qty:

 
MB Sturgis 108072-MBS 30 PSI High Pressure LP Gas Regulator — Single Stage, 1/4" Female NPT Inlet x 1/4" Female NPT Outlet

MB Sturgis 108072-MBS 30 PSI High Pressure LP Gas Regulator, Single Stage, 1/4" Female NPT Inlet x 1/4" Female NPT Outlet

Steps propane cylinder pressure down to a regulated 30 PSI output. 1/4" female NPT inlet and outlet. Single stage, 65,000 BTU. UL144 certified for LP gas. -20°F to 120°F operating range. Horizontal mount.

Why Choose the MB Sturgis 108072-MBS?

Propane leaves the tank at high, variable pressure that depends on tank fill level and ambient temperature — far too high and inconsistent to feed directly into most gas lines or downstream regulators safely. The MB Sturgis 108072-MBS is a single-stage high-pressure regulator that takes that raw cylinder pressure and steps it down to a steady, regulated 30 PSI output, giving you a consistent, predictable supply pressure to work with further down the system.

With a 1/4" female NPT inlet and a matching 1/4" female NPT outlet, the 108072-MBS threads directly into standard pipe-threaded fittings on both ends — no flare adapters needed if your connections are already NPT. It's commonly used as the first-stage regulator in multi-regulator gas distribution setups, such as feeding several individual RVs from a single large propane source, or as part of a two-regulator system where a second, low-pressure regulator further reduces the 30 PSI output down to the roughly 11" water column pressure that RV appliances actually require.

⚙️ Steady 30 PSI Output

Regulates variable cylinder pressure down to a consistent 30 PSI, protecting downstream components and lines

🔧 1/4" NPT Inlet & Outlet

Female NPT threads on both ends thread directly into standard pipe-threaded fittings without flare adapters

✅ UL144 Certified

Certified to UL144 standard for LP gas regulator applications

📐 Single Stage Design

Straightforward single-stage regulation — ideal as the first stage in a multi-regulator distribution setup

⚠️ High-Pressure Regulator Only — Typically Requires a Second Low-Pressure Regulator for RV Appliances

The 108072-MBS regulates gas down to 30 PSI — a high-pressure output, not the low water-column pressure (typically around 11" W.C.) that RV appliances like stoves, furnaces, and water heaters are designed to run on.

This regulator is typically used:
• As the first stage in a two-regulator setup, paired with a second low-pressure regulator that steps the 30 PSI output down further to appliance-safe pressure
• To distribute propane from a large central tank (such as a 1,000-gallon supply) to multiple separate RVs, each with its own downstream low-pressure regulator
• In applications specifically requiring a 30 PSI supply pressure

This regulator should NOT be used to feed RV appliances directly without a downstream low-pressure regulator — doing so would deliver dangerously high pressure to appliances designed for low water-column pressure.

If you need a regulator to feed RV appliances directly from a propane tank, look at MB Sturgis's two-stage regulators (such as the Two-Stage Regulator or Vertical 2-Stage Propane Regulator) instead, which handle both pressure-reduction stages in one unit.

Key Features & Benefits

  • 30 PSI Regulated Output: Converts variable, high cylinder pressure into a steady 30 PSI supply
  • 1/4" Female NPT Inlet: Threads directly into compatible male NPT fittings without requiring a flare adapter
  • 1/4" Female NPT Outlet: Matching outlet thread allows direct connection to downstream NPT-threaded components
  • Single Stage Regulation: Straightforward pressure reduction in one stage, commonly paired with a second low-pressure regulator downstream
  • 65,000 BTU Capacity: Suitable for the flow demands of typical high-pressure distribution applications
  • UL144 Certified: Meets recognized safety certification standards for LP gas regulators
  • Wide Operating Temperature Range: Rated for use from -20°F to 120°F
  • Horizontal Mount, Packaged: Designed for horizontal mounting in a packaged housing
  • Trusted Manufacturer Since 1959: MB Sturgis has decades of experience supplying gas connection products to OEMs and gas installers

Technical Specifications

Part Number108072-MBS
BrandMB Sturgis
Product TypeHigh Pressure LP Gas Regulator
Regulated Outlet Pressure30 PSI
Number of StagesSingle Stage
Inlet Size / Type1/4" Female NPT
Outlet Size / Type1/4" Female NPT
BTU Rating65,000 BTU
CertificationUL144 (LP Gas Only)
Temperature Range-20°F to 120°F (-40°C to 55°C)
MountingHorizontal
PackagingPackaged

📋 Installation Overview

Installation Steps:

1. Shut Off Gas Supply: Close the tank valve completely before installing or replacing a regulator

2. Confirm System Design: Verify whether this regulator is intended as a stand-alone high-pressure stage or as the first stage feeding a downstream low-pressure regulator — confirm your overall system design before installation

3. Mount Horizontally: Install the regulator in a horizontal mounting position per the included instructions

4. Connect Inlet: Thread the upstream gas supply line's male NPT fitting into the regulator's 1/4" female NPT inlet, using appropriate thread sealant rated for gas lines

5. Connect Outlet: Thread the downstream line or regulator's male NPT fitting into the 1/4" female NPT outlet

6. Tighten Securely: Tighten both connections to a secure, leak-free fit without overtightening

7. Leak Test: Slowly open the gas supply and perform a soap-and-water leak test on all connections before placing the system into service

Regulator installation should be performed or verified by a qualified technician. Always leak-test connections before use.

📦 What's Included

In The Package:
• (1) 108072-MBS 30 PSI High Pressure Regulator
• 1/4" Female NPT Inlet and Outlet Connections

NOT Included:
• Mounting hardware
• Downstream low-pressure regulator (required separately for direct appliance feed applications)
• Thread sealant
• Pigtail or supply hose

📞 MB Sturgis Support

MB Sturgis Technical Support:
Phone: (314) 291-6665
Email: [email protected]

MB Sturgis Inc. has supplied OEMs, distributors, gas installers, and end users with safe LP and natural gas connection products since 1959.

Compatibility Reference

Feature / Factor Compatible ✓ NOT Compatible ✗
Inlet Connection
Gas supply lines or fittings with 1/4" male NPT connection
Flare-style or POL connections without an adapter — fitting type mismatch
Outlet Connection
Downstream lines or components with 1/4" male NPT connection
Flare-style downstream connections without an adapter
Application
First-stage pressure reduction feeding a second low-pressure regulator, or applications specifically requiring 30 PSI supply
Direct feed to RV appliances without a downstream low-pressure regulator — appliances require much lower water-column pressure
Mounting
Horizontal mounting orientation
Vertical mounting — confirm orientation requirements before installation


Browse for more RV Accessories in the same category as this item:

LP Gas > LP Regulators
LP Gas


$38.95