Converts your Weber Q grill from high-pressure disposable cylinder use to your RV's low-pressure propane system. Includes 72" quick-disconnect hose and grill inlet adapter. Compatible with Weber Q 100, 200, 1000, 1200, 2000, and 2200 models.
Weber Q grills are one of the most popular portable grill choices for RVers — but out of the box, they're designed to run on small high-pressure disposable propane cylinders. The MB Sturgis 103009-72-MBS conversion kit lets you ditch the disposable cylinders and connect your Weber Q directly to your travel trailer or camper's low-pressure propane system, drawing from your on-board tank supply instead.
The kit includes everything you need to make the conversion: a 72" quick-disconnect propane hose that plugs into your RV's existing 1/4" Model 250 quick-disconnect port, and a grill inlet adapter (Male #600 x Male Model 250 QD Plug) that replaces the Weber Q's factory pressure regulator to accept the low-pressure RV gas supply. Connection and disconnection at both ends is tool-free — just push and click. The conversion mates with any MB Sturgis or Gas Flow 1/4" quick-disconnect port already installed on your travel trailer or camper. Made in the USA by MB Sturgis, a family-owned manufacturer with over 65 years of experience supplying gas connection products to OEMs and end users.
Converts your Weber Q from disposable cylinder use to your RV's on-board propane supply — no more buying 1 lb cylinders
Model 250 QD fittings on the hose connect and disconnect from your RV's propane port and the grill without tools
Six feet of reach lets you position your Weber Q at a comfortable working distance from your RV's propane connection point
Manufactured by MB Sturgis Inc., a family-owned American company supplying OEM-grade gas connection products since 1959
This kit requires removing the Weber Q's factory pressure regulator and replacing it with the included low-pressure grill inlet adapter. Once the factory regulator is removed, the grill must only be used with a low-pressure gas source — such as your RV's propane system with this kit installed. Do NOT connect to: • High-pressure propane sources • Standard 1 lb or 20 lb disposable propane cylinders without a low-pressure regulator • Any high-pressure gas line The Weber Q's factory burner and valve system is designed for a specific low pressure once converted. Using high-pressure gas without the factory regulator is a serious safety hazard. Keep the factory regulator stored safely in case you ever want to reverse the conversion for use away from your RV.
Before ordering, confirm the following: 1. RV quick-disconnect port: This kit connects to a female Model 250 (1/4") quick-disconnect port already installed on your RV's propane system — such as a Sturgi-Stay T-fitting or similar adapter. If your RV does not have one, you will need to install a QD port first. 2. Compatible Weber Q models: This kit is compatible with the Weber Q 100, 200, 1000, 1200, 2000, and 2200. It is not confirmed to work on other Weber grill models or non-Weber grills — check before ordering. 3. Hose length: This is the 72" version. The 103009 family is also available in 48" (103009-48-MBS) and 120" (103009-120-MBS) if a different reach is needed.
Conversion Steps: 1. Shut Off Gas: Ensure all gas supplies are off before beginning 2. Remove Weber Q Factory Regulator: Detach the factory high-pressure regulator from the grill's gas inlet — retain it safely in case you want to reverse the conversion 3. Install Grill Inlet Adapter: Thread the included Male #600 x Male Model 250 QD Plug adapter into the Weber Q's gas inlet port 4. Connect Hose to Grill Adapter: Push the hose's female Model 250 coupler end onto the grill inlet adapter until it clicks locked 5. Connect Hose to RV Port: Push the hose's male Model 250 plug into your RV's female quick-disconnect port until it locks 6. Open Gas Supply and Leak Test: Slowly open the RV's propane supply and perform a soap-and-water leak test at all connections before lighting the grill Follow all safety instructions in the kit's packaging. Never use this kit with high-pressure gas sources after removing the Weber Q's factory regulator.
In The Kit: • (1) 72" Propane Hose — Male Model 250 QD Plug x Female Model 250 QD Coupler • (1) Grill Inlet Adapter — Male #600 x Male Model 250 QD Plug NOT Included: • Weber Q grill (sold separately) • RV quick-disconnect port/T-fitting (required if not already installed on your RV) NOT Included — Retain Separately: • Your Weber Q's factory pressure regulator — remove and store safely for potential future use
MB Sturgis Technical Support: Phone: (314) 291-6665 Email: [email protected] MB Sturgis Inc. has supplied OEMs, distributors, gas installers, and end users with safe LP and natural gas connection products since 1959.