Replaces the standard motorhome door handle with a full-length handrail. Extends 16" from the motorhome with ~36" of continuous support. Magnetic lock holds rail secure during travel.
The standard door handle on most motorhomes is a small, single-grip bar positioned in one fixed spot — rarely long enough to assist safely through the full entry and exit motion. The MORryde SP56-632 Motorhome Safe-T-Rail replaces that standard door handle entirely with a full-length telescoping handrail that provides nearly 36" of continuous, smooth grip surface and extends 16" away from the motorhome when deployed.
Unlike the towable Safe-T-Rail models (SP56-469 and SP56-573) that mount to a separate wall bracket, the Motorhome Safe-T-Rail installs in the existing door handle mounting location — no extra holes, no additional brackets, no wall-mount hardware needed. When it's time to drive, the rail telescopes back and is held flat against the motorhome by a magnetic lock, sitting cleanly out of the way until needed again at the next stop.
Installs directly in the existing motorhome door handle mounting location — no additional brackets or wall holes required
Full-length handrail delivers nearly 36" of uninterrupted smooth grip — dramatically more support than a standard door handle
Telescopes 16" away from the motorhome to position the rail alongside the entry steps for secure, natural handrail support
Rail folds flat against the motorhome and locks magnetically during travel — no manual latching, no protruding hardware while driving
The SP56-632 is designed exclusively for motorhomes. It replaces the standard motorhome door handle and is engineered around motorhome door geometry and mounting patterns. It is not compatible with fifth wheels or travel trailers. Do not order if you own a: • Fifth wheel trailer — see SP56-573 Short Safe-T-Rail or SP56-469 Safe-T-Rail • Travel trailer — see SP56-573 Short Safe-T-Rail or SP56-469 Safe-T-Rail • Cargo trailer or other towable with an A-frame tongue Use MORryde's Motorhome Safe-T-Rail Qualifier to confirm your specific motorhome's door handle configuration is compatible before purchasing.
The SP56-632 replaces your existing door handle at the factory mounting location. Before ordering, confirm: 1. Standard door handle mounting: Your motorhome must have a standard door handle in a configuration compatible with the SP56-632's mounting pattern. Non-standard handles or highly customized door configurations may not be compatible. 2. Clearance when extended: Verify the rail can extend 16" outward from the motorhome door without contacting the entry steps, slide-outs, or other exterior components in the extended position. 3. Clearance when stowed: Confirm the rail lies flat and the magnetic lock holds it securely without interfering with door operation, awnings, or compartments when retracted. Use MORryde's Motorhome Safe-T-Rail Qualifier guide for your specific make, model, and door configuration before purchase.
Installation Steps: 1. Qualify Your Motorhome: Use MORryde's Motorhome Safe-T-Rail Qualifier to confirm your motorhome's door handle configuration is compatible with the SP56-632 2. Remove Existing Door Handle: Detach the factory door handle from its mounting location per the installation guide 3. Mount the Safe-T-Rail: Attach the SP56-632 to the same mounting location using the existing hardware positions per the installation instructions 4. Test Extension: Deploy the rail to its full 16" extension and verify clearance from all adjacent components — steps, awning, compartment doors 5. Verify Magnetic Lock: Retract the rail and confirm the magnetic lock holds it flat against the motorhome securely before driving Refer to MORryde's Motorhome Safe-T-Rail Installation Instructions for complete fastener specifications and motorhome-specific guidance.
In The Box: • Motorhome Safe-T-Rail Telescoping Handrail Assembly • Mounting Hardware • Installation Instructions Replaces: • Your existing standard motorhome door handle Towable RV Alternatives: • SP56-469 Safe-T-Rail — 5th wheels & travel trailers (42.5" ext., 54" rail) • SP56-573 Short Safe-T-Rail — 5th wheels & travel trailers (34" ext., ~48" rail)
MORryde Technical Support: Phone: (574) 293-1581 Email: [email protected] Made in Elkhart, Indiana, USA MORryde is an ISO 9001 certified manufacturer of RV safety, entry, and specialty vehicle products.
MORryde makes three Safe-T-Rail models for different RV types and entry configurations. The SP56-632 is the only one designed for motorhomes.
Use MORryde's model-specific Qualifier guides before purchasing. Contact MORryde at (574) 293-1581 for fitment assistance.