Home > Covers > Class C RV Covers >

Classic Accessories PermaPRO Class C RV Cover Model 6 -- Fits 32 to 35 Foot RVs, Part 01-0818

Classic Accessories PermaPRO Class C RV Cover Model 6 part 01-0818 in gray, fits 32 to 35 foot Class C motorhomes with zippered access panels and air vent system
Classic Accessories PermaPRO Class C RV Cover - Model 6 - 32'-35'
 
Alternative Views:


List Price: $794.79
: $591.49
You save $203.30!
Part Number: 80-314-191001-RT
Manufacturer: Classic Accessories

Quantity in Stock :6

Free Shipping
Availability: In Stock
Qty:

 
Classic Accessories Class C -- 32 to 35 ft 4-Year Warranty PermaPRO Class C RV Cover -- Model 6 (Part 01-0818)

Designed specifically for Class C motorhomes in the 32 to 35 foot range, the Classic Accessories PermaPRO Model 6 cover combines a breathable, quick-drying fabric with a practical strap and access system that makes solo installation far less of a chore. It keeps your rig clean, dry, and protected from UV degradation during storage -- without trapping moisture underneath.

Full-Season Protection Built for Class C Motorhomes

Class C motorhomes present a unique covering challenge: the cab-over bunk overhang, the height, and the length all demand a cover engineered specifically for this body style. Classic Accessories designed the PermaPRO Model 6 around those proportions -- 436 inches long, 105 inches wide, and 111 inches tall -- so the cover drapes correctly without pooling fabric or leaving gaps at the transitions.

The PermaPRO fabric is a breathable, quick-drying material that allows trapped moisture and condensation to escape rather than accumulate under the cover. Combined with the built-in air vent system, it actively reduces wind-induced ballooning and stress on seams during gusty storage conditions.

Air Vent System

Reduces wind stress and allows interior moisture to escape, preventing mold and mildew buildup during long-term storage.

Zippered Access Panels

Multiple zippered panels let you reach entry doors and storage compartments without removing the entire cover.

Weighted Strap Toss System

Integrated strap attachment with weighted toss bags eliminates crawling under the RV -- route straps from one side without going underneath.

Adjustable Tension Fit

Front and rear tension panels plus elasticized hem corners pull the cover snug and reduce flapping, protecting fabric and finish alike.

What the PermaPRO Fabric Does

The PermaPRO material is engineered to be polypropylene-based, solution-dyed, and treated for UV resistance. It blocks harmful UV rays that bleach decals, oxidize gel coat, and degrade rubber seals over time. The fabric is not a waterproof barrier in the way a tarp is -- it is water-resistant and breathable by design. This tradeoff is intentional: a fully waterproof cover traps condensation, which causes more long-term damage than light moisture that can dry out.

Why breathable beats waterproof for storage covers: A sealed cover traps humidity from temperature swings, creating condensation that promotes mildew on fabric interiors, corrosion on metal components, and delamination of wall panels. The PermaPRO breathable construction lets that moisture vapor escape while still shedding rain and blocking UV.

Installation Features That Matter

Installing a cover on a 32 to 35 foot Class C solo is genuinely difficult. Classic Accessories addressed several of the common pain points in the Model 6 design:

  • Long zipper pulls -- reduce the need to climb a ladder to zip or unzip access panels.
  • Weighted toss bag strap system -- toss the bag over the roof to route the belly straps from one side, no crawling required.
  • Tension panels at front and rear -- allow you to tighten the belly straps firmly without distorting the cover fabric or stressing the seams.
  • Elasticized hem corners -- conform to the contour of the rear cap and cab corners for a cleaner, more secure fit.
  • Expandable storage bag -- the cover packs into an included bag that expands to make repacking easier after use.
Access while covered: The zippered panels are positioned to reach the main entry door and key exterior storage bays. You do not need to pull the entire cover off to grab gear or access a compartment during a short stop.

Protection Summary

The PermaPRO Model 6 is rated to protect against the following:

  • Dirt and road dust accumulation during storage
  • UV ray damage to decals, gel coat, and rubber seals
  • Bird droppings, tree sap, and pollen
  • Moderate weather including rain and snow loading
Heads up -- extreme weather limits: This cover is designed for storage, not active severe weather like hurricane-force winds or heavy sustained ice accumulation. During periods of extreme weather, additional tie-down precautions or indoor storage are recommended.

Warranty

The Classic Accessories PermaPRO Model 6 cover is backed by a limited 4-year manufacturer warranty against defects in materials and workmanship. This is one of the more substantial warranties in the RV cover category and reflects the quality of the PermaPRO fabric construction.

Storage and maintenance tips:
  • Clean the cover with mild soap and water before storing it in the bag -- storing it dirty accelerates fabric degradation.
  • Make sure the RV roof and sides are dry before covering for extended periods to reduce trapped moisture.
  • Inspect the cover each season for small tears or abraded spots near the strap attachment points; address early to extend cover life.
  • Store the packed cover bag indoors when not in use to protect the fabric from UV breakdown while stored.

Cover Dimensions and Fit

Fits RV Length32 ft to 35 ft Class C motorhomes
Cover Length436 inches (36 ft 4 in)
Cover Width105 inches (8 ft 9 in)
Cover Height111 inches (9 ft 3 in)
RV Body StyleClass C motorhome (cab-over design)

Product Identity

ManufacturerClassic Accessories
Product LinePermaPRO
ModelModel 6
Vendor Part Number01-0818
SKU01-0225
UPC052963025071
ColorGray

Physical Specifications

Cover Weight29.2 lbs
Fabric TypePermaPRO breathable, quick-drying polypropylene-based material
UV ProtectionYes -- UV-resistant fabric treatment
Water ResistanceWater-resistant and breathable (not fully waterproof)
Storage Bag IncludedYes -- expandable bag for easier repacking

Key Features Checklist

Air Vent SystemYes -- reduces wind stress and vents moisture
Zippered Access PanelsYes -- door and storage compartment access
Long Zipper PullsYes -- reduces ladder use
Weighted Toss Bag StrapsYes -- no crawling under RV required
Tension PanelsFront and rear -- reduce cover stress under strap tension
Elasticized Hem CornersYes -- conforms to cap and cab contours

Warranty and Support

WarrantyLimited 4-year manufacturer warranty
Warranty CoverageDefects in materials and workmanship
Important Information -- Read Before Purchase and Use
  • This cover is sized for Class C motorhomes between 32 and 35 feet. Verify your RV's actual length before ordering -- the Model 6 will not fit correctly on significantly shorter or longer rigs.
  • This cover is water-resistant and breathable, not fully waterproof. It is designed for storage protection, not use as a storm shelter during active severe weather events.
  • Do not install over a wet or damp RV roof for extended storage periods. Allow the RV exterior to dry before covering to minimize trapped moisture.
  • Inspect strap attachment points and fabric regularly. Abrasion from sharp edges or antenna mounts can wear through the fabric over time.
  • This cover is designed for ground-level and low-profile storage. Exercise caution when working on a ladder during installation on a tall Class C.
  • The weighted toss bag system reduces but does not eliminate the need for two people during initial installation on a large motorhome.


Browse for more RV Accessories in the same category as this item:

Covers > Class C RV Covers
Covers