Home > Covers > Pop-Up Trailer Covers >

CarCover Gold Shield 5L Folding Pop-Up Camper Cover 5FC-1012 -- Fits 10 to 12 Feet Long

CarCover Gold Shield 5L Folding Pop-Up Camper Cover 5FC-1012 in gray, fits campers 10 to 12 feet long, 5-ply top construction
CarCover 5FC-1012 Gold Shield 5L Folding Pop-Up Camper Cover - 10' To 12' Feet Long
 
Alternative Views:


🛡️ All-season cover for 10'–12' pop-up campers
🌧️ Shields from rain, snow, sun, and debris
🌀 Windproof fit prevents flapping and tears
💨 Vents reduce moisture and mildew
: $109.19
Part Number: 5FC-1012
Manufacturer: CarCover
NOTE: Ground Shipping Only

Quantity in Stock :11

Free Shipping
Availability: In Stock
Qty:

 
CarCoverGold Shield 5LFits 10-12 Ft Pop-Up CampersCarCover Gold Shield 5L Folding Pop-Up Camper Cover -- 5FC-1012

Stop seasonal storage from degrading your investment. The Gold Shield 5L cover wraps your folding pop-up camper in five-layer top protection and three-layer side protection, defending against UV rays, rain, snow, hail, bird droppings, tree sap, and road dust year-round. Designed specifically for folding pop-up campers measuring 10 to 12 feet in length, it installs tool-free and stores in the included bag when not in use.

All-Season Protection Built for Folding Pop-Up Campers

Folding pop-up campers sit lower than conventional trailers and are especially vulnerable to pooling moisture, UV bleaching on fabric and vinyl, and wind-driven debris during off-season storage. The Gold Shield 5L addresses each of those failure points with a purpose-layered construction and a fit system engineered to stay put through wind and weather.

The cover is gray in color, which reflects sunlight to reduce heat buildup inside the camper during warm-weather storage. At 18 lbs., it is manageable for a single person to install or remove without help from a ladder or specialty tools.

5-Ply Top Panel

Four polypropylene PLUS layers plus one micro-porous film layer provide maximum resistance to water, snow, and UV on the most exposed surface of your camper.

3-Ply Side Panels

Two polypropylene PLUS layers and one micro-porous film layer protect the sides while keeping overall weight manageable at 18 lbs.

Breathable Micro-Porous Film

The internal film layer allows moisture vapor to escape while blocking liquid water entry, actively preventing mold, mildew, and rot on canvas and vinyl surfaces.

Secure Fit System

Adjustable weighted buckles eliminate slack, elastic hems lock the front and rear corners, and a slip-seam design conforms to the camper's profile to reduce wind lift.

Construction and Weather Defense

The top panel extends downward along all sides, creating an overlap that prevents wind-driven rain from working under the edge seam. All panel junctions are reinforced with double-line stitching for long-term durability at the points of highest stress. The micro-porous film layer is embedded within the laminate stack rather than applied as a surface coating, so it does not peel or degrade with repeated folding and storage.

Blocks Over 98% of Dirt and Dust

The polypropylene PLUS outer layers are rated to block over 98% of airborne dirt and dust, protecting painted metal, gel coat, and vinyl surfaces from abrasive micro-particle damage during storage.

Installation and Fit

The cover fits folding pop-up campers from 10 to 12 feet in length. The slip-seam profile and elastic corner hems mean no ratchet straps or bungee cords are needed for a secure fit. Weighted buckles on the adjustable strap system are easy to fasten and remove with bare hands, even in cold weather.

  • Elastic hems at front and rear corners for a snug, rattle-free fit
  • Adjustable buckle straps with weighted ends prevent billowing in wind
  • Slip-seam design follows camper contours to reduce wind catch area
  • Tool-free installation -- no ladders or specialty hardware required
  • Top layer wraps down over sides for full perimeter overlap
What Is Included

Each 5FC-1012 cover ships with a patch kit for field repairs and a zippered storage bag for off-season storage or transport. The cover itself is the only protective product in the box -- no tie-down straps beyond the integrated buckle system are included.

Long-Term Storage Tips

Get More Life From Your Cover
  • Clean and dry the camper surface before installing the cover -- trapping moisture accelerates mildew growth under any cover material.
  • Inspect the cover's seams and micro-porous film layer at the start of each storage season; use the included patch kit on any small tears before they grow.
  • If storing in a location with heavy snow load, periodically brush snow accumulation off the cover to prevent stress on stitching and buckles.
  • Store the cover loosely folded in the included bag rather than tightly compressed to extend film layer life.

Warranty

This cover is backed by a Lifetime Manufacturer Warranty from CarCover against defects in materials and workmanship.

Cover Specifications

Part Number5FC-1012
ManufacturerCarCover
Product LineGold Shield 5L
Cover ColorGray
Cover Weight18 lbs.
Cover Dimensions12.5 ft. length x 7.17 ft. width x 3.75 ft. height
WarrantyLifetime Manufacturer Warranty

Fitment

Camper TypeFolding pop-up camper (tent trailer)
Camper Length Range10 ft. to 12 ft.
ApplicationOutdoor seasonal storage, indoor storage, trailering dust protection

Top Panel Construction

Number of Layers5
Outer Layers4x polypropylene PLUS fabric
Barrier Layer1x micro-porous breathable film
FunctionWater, UV, snow, hail, bird drop, tree sap, dirt/dust resistance
Dirt and Dust Block RatingOver 98%

Side Panel Construction

Number of Layers3
Outer Layers2x polypropylene PLUS fabric
Barrier Layer1x micro-porous breathable film
StitchingDouble-line reinforced at all panel junctions

Fit and Retention System

Corner FitElastic hems at front and rear
Strap SystemAdjustable buckle straps with weighted ends
Edge DesignSlip-seam profile to reduce wind lift
Top OverlapTop panel extends downward over all sides

In the Box

Cover1x Gold Shield 5L pop-up camper cover
Patch KitIncluded -- for field repairs
Storage BagIncluded -- zippered bag for storage and transport
Important Information
  • This cover is sized for folding pop-up campers 10 to 12 feet in length only -- do not attempt to use on campers outside this length range as fit and retention will be compromised.
  • Cover dimensions are 12.5 ft. x 7.17 ft. x 3.75 ft. -- verify your camper does not exceed these dimensions before ordering.
  • This cover is water-resistant and breathable, not fully waterproof under sustained hydrostatic pressure -- do not allow water to pond on the cover surface; keep the cover taut using the buckle system.
  • Always clean and completely dry the camper surface before installing the cover to prevent mold and mildew growth beneath the cover.
  • Do not use abrasive cleaners or solvents to clean the cover; hand wash with mild soap and allow to air dry fully before storage in the bag.
  • Heavy snow accumulation should be cleared periodically to avoid overloading stitching and fit system components.
  • Patch kit is included for minor repairs -- do not use a damaged cover with open tears as weather protection will be significantly reduced.
How To Measure Your Folding Popup Camper:

Length: Measure the longest distance from the front to the rear of the camper, ensuring to include the spare tire and ladder. Be sure to exclude the hitch and tongue from your measurements!

Height: Measure the sidewalls of the camper from the highest point of the roofline down to the outer frame. Remember to exclude ground clearance, roof-mounted accessories, vents, and air conditioning units. If your trailer is equipped with an air conditioner and the height measurement (excluding the A/C unit) is within 4 inches of the maximum limit for the cover you're considering, we recommend opting for the next larger size to accommodate the air conditioner.



How to Install Your Pop-up Camper Cover:

1. Identify the Front: Most folding pop-up camper covers feature a "Front" tag on the interior, either sewn or stamped. Use this tag to clearly determine the front and rear of your cover.
2. Check Tag Placement: Ensure that all tags are located on the inside of the cover. Installing the cover upside down may lead to damage to your vehicle's paint.
3. Prepare the Cover: Fold the sides of the cover toward the center for easier handling.
4. Roll the Cover: Starting from the rear, roll the cover toward the front, leaving the loose end at the front.
5. Position the Rolled Cover: Place the rolled cover at the rear of the folding pop-up camper.
6. Unfold the Cover: Begin at the front of the camper and unfold the cover from side to side, allowing it to drape down over the sides as you move toward the rear.
7. Adjust as Needed: Walk around the camper and make any necessary adjustments to ensure the cover fits snugly from side to side.

Removal:

1. Release All Fastenings: Carefully undo all straps and zippers securing the folding pop-up camper cover.
2. Lift the Front: Raise the front of the cover to the top of the folding pop-up camper.
3. Lower from the Rear: From the rear of the camper, gently pull the cover down to remove it completely.

For Cleaning:

Proper care of your RV cover is essential for maintaining its performance and water resistance. Contaminants like dirt and grease can damage the cover, so regular washing is recommended for long-lasting protection.

You can wash the cover by hand or in a washing machine. For hand washing, install the cover on your RV, rinse it with a hose, then use a cloth and multi-purpose cleaner to scrub. Rinse again and either towel dry or let it air dry.

For machine washing, use the largest machine available, set it to gentle mode, and wash with mild powder detergent in cold water—avoid bleach and fabric softeners. Rinse the cover twice to remove all detergent, and always air dry.



Browse for more RV Accessories in the same category as this item:

Covers > Pop-Up Trailer Covers
Covers


$14.47