Professional-grade 3-chamber on-demand diaphragm pump. Plug-in 115 VAC convenience with direct OEM fit. Includes 50-mesh filter and fittings. NSF, CSA, CE & RoHS certified. Made in the USA.
The Remco PowerRV 3200 Series is engineered from the ground up to be the ideal balance of price, performance, and reliability in an RV freshwater pump. The 3214-1C4-52C is the 115 VAC variant — designed for shore-power connected RVs, coaches, and cabins that want professional-grade on-demand water delivery without the need for a DC converter or battery draw.
Its three-chamber positive displacement diaphragm design produces smooth, consistent flow at 3.2 GPM and 45 PSI — enough pressure for comfortable showers, simultaneous fixture use, and confident flushing. The advanced pump head geometry allows the 3200 Series to prime further and respond faster than older designs, while the noise-dampening rubber base keeps operation quiet. An included 50-mesh inline filter protects the pump from debris right out of the box.
With a direct OEM-compatible mounting footprint, the 3214-1C4-52C drops straight into virtually any existing RV pump installation with no modifications — making it the straightforward, cost-effective upgrade or replacement choice for trailers, campers, fifth wheels, and motorhomes on shore power.
Connects to standard shore power — no battery draw, no DC converter needed for shore-power RV setups
Noise-dampening rubber base isolates vibration for quiet operation even in sleeping areas
Industry-standard mounting pattern replaces most existing RV water pumps without any modifications
NSF, CSA, CE, and RoHS certified — meets safety and potable water standards for freshwater use
The 3214-1C4-52C is designed for freshwater systems that operate on 115 VAC shore power: RV & Recreational: • Travel trailers, fifth wheels, and campers on campsite hookups • Motorhomes and coaches connected to shore power • Direct OEM replacement for existing shore-power RV pump installations Off-Grid & Residential: • Cabin and off-grid freshwater systems with AC power • Alternative energy systems with inverter or generator output • General industrial freshwater delivery on 115 VAC circuits Freshwater use only. Not for agricultural chemicals, saltwater, or non-potable fluids.
Plug-and-play design — a typical installation takes under an hour. 1. Install the Inline Filter: Attach the included 50-mesh filter to the pump inlet before connecting any plumbing — this protects the pump from sediment from day one. 2. Mount the Pump: Secure to a flat surface using the rubber noise-dampening base and the OEM-compatible mounting pattern. Use #10 screws with washers — tighten until snug, not compressing the rubber base. 3. Connect Plumbing: Thread the included ½" MNPT × ¾" QA fittings into your existing plumbing lines. Apply Teflon tape to all threaded connections. Snap the ¾" Quick Attach hoses onto the pump ports. 4. Electrical Connection: Connect the 18 AWG leads to your 115 VAC supply circuit. Protect the line with a 10 Amp fuse as close to the power source as possible. 5. Prime & Test: Restore power and briefly run the pump to purge air. The on-demand pressure switch will engage and disengage smoothly. Check all connections for leaks.
In The Box: • 3214-1C4-52C Power RV 3200 Series Pump • 50-Mesh Inline Inlet Filter • (2) ½" MNPT × ¾" Quick Attach Fittings • Noise-dampening rubber mounting base • Mounting hardware • Installation instructions NOT Included (May Need Separately): • 10 Amp inline fuse and fuse holder • Teflon thread tape • Additional hose, clamps, or adapters • Accumulator tank (optional — compatible with 3200 Series, unlike AquaJet)
Download the Remco 3200 RV Series Installation & Owner's Manual (PDF) Download the 3200 Series Product Flyer (PDF) Technical Support: Remco Industries Phone: 1-800-228-2481 remcoindustries.com
The 3214-1C4-52C is covered by Remco Industries' 1-Year Limited Manufacturer's Warranty from the date of manufacture (or 1 year from date of purchase with proof of purchase). Remco will repair or replace, at their discretion, any unit found defective in materials or workmanship under normal use. Warranty does NOT cover: • Misuse, abuse, misapplication, or external damage • Products altered outside the Remco factory • Normal wear or appearance issues • Pumps not compliant with Remco Engineering Standards Warranty returns require a Return Material Authorization (RMA) number prior to shipping any product back to Remco.
All 3200 RV Series models share the same 3-chamber diaphragm design, EPDM valves, Santoprene diaphragm, ¾" Quick Attach ports, run-dry capability, OEM mounting pattern, and Made in USA construction. The only difference between variants is the voltage configuration. Choose your model based on the power source available in your specific installation.