Restore your patio awning to like-new condition with this heavy-duty 13.5-oz vinyl replacement fabric from Lippert. Engineered to fit 11-foot Solera, Dometic, and Carefree awning assemblies, this Silver Fade fabric delivers the weather protection and UV resistance your rig needs -- backed by a 5-year limited manufacturer warranty. Made to order, so measure before you buy.
The Lippert V000334353 uses 13.5-oz vinyl construction -- a commercial-grade weight that resists tearing, UV degradation, and moisture infiltration far better than lighter economy fabrics. Heat-welded seams eliminate stitching that can wick water or unravel over time, reinforcing the fabric at its highest-stress points along the roller hem and valance edge.
The Silver Fade colorway features a gradient finish on the exterior with a clean white underside, keeping the interior of your awning space bright. Whether you are parked at a full-hookup campground or dry-camping in the desert, this fabric is ready for extended outdoor exposure.
Certified to -25F, so the vinyl stays flexible in cold-weather camping conditions and does not crack, stiffen, or delaminate when rolled up in freezing temps.
Seams are thermally fused -- not stitched -- creating a leak-resistant bond that holds under wind load and rain without the failure points of traditional sewing.
A poly cord runs the length of the fabric for an optional aftermarket LED light track. Light track and LED lights are sold separately and are not included.
Designed to fit Solera awning assemblies and also compatible with comparable Dometic and Carefree awning systems of the same size class.
This fabric has a finished width of 10 feet 1 inch and is intended for 11-foot awning assemblies. This is not a discrepancy -- replacement awning fabric is intentionally manufactured approximately 11 inches narrower than the nominal awning assembly width to account for roller tube end caps, arm hardware, and installation tolerances. If your awning assembly measures 11 feet rail-to-rail, this is the correct fabric size.
The fabric has an 8-foot projection (the depth from the roller tube to the lead rail when fully extended). Verify your awning's projection measurement before ordering to confirm this fabric will work with your existing hardware.
Not included: roller tube assembly, awning arms, lead rail, LED light track, mounting hardware, or any other awning components. This is a fabric-only replacement.
Replacing awning fabric typically involves removing the roller tube from the awning arms, sliding the old fabric out of the roller tube channel, and threading the new fabric's hem into the tube before re-mounting. Most RV owners with basic mechanical comfort complete this as a DIY project. Key tips:
Lippert's Solera awning product line is one of the most widely installed OEM awning systems on production RVs from manufacturers including Forest River, Keystone, Coachmen, and Grand Design. Solera replacement fabrics use the same hem profile and roller slot dimensions as the original OEM fabric, making them a straightforward drop-in replacement without requiring aftermarket adapters. The 13.5-oz weight is the standard specification across the Solera fabric replacement line.