Home > Covers > Travel Trailer Covers >

Classic Accessories PermaPRO Travel Trailer Cover Model 4 -- Fits 24 ft to 27 ft Trailers, Part 01-0273

Classic Accessories PermaPRO Model 4 travel trailer cover part 01-0273 fits 24 to 27 foot trailers with ripstop fabric and zippered access panels
Classic Accessories PermaPRO Travel Trailer Cover - Model 4 - 24'-27'
 
Alternative Views:


Travel Trailer Cover, Classic Accessories Cover, Trailer Accessories
List Price: $675.39
: $502.99
You save $172.40!
Part Number: 80-137-171001-00
Manufacturer: Classic Accessories

Quantity in Stock :10

Free Shipping
Availability: In Stock
Qty:

 
Classic AccessoriesFits 24 ft - 27 ftLimited Lifetime WarrantyPermaPRO Travel Trailer Cover -- Model 4 (24 ft to 27 ft)

Keep your investment protected season after season with the Classic Accessories PermaPRO Model 4 travel trailer cover. Engineered with extra-strength ripstop fabric, an integrated air vent system, and zippered access panels, this cover delivers serious all-weather protection without forcing you to crawl under your rig or climb a ladder every time you secure it. Part number 01-0273.

Full-Season Protection Built for Real RV Owners

The PermaPRO cover is designed specifically for travel trailers in the 24 ft to 27 ft range. Whether your trailer sits in a driveway all winter or gets covered between weekend trips, this cover addresses the real-world frustrations of traditional RV covers -- loose fit, moisture trapping, door access, and difficult installation.

The PermaPRO fabric is a lightweight ripstop material that repels water and dries quickly, reducing the moisture buildup that accelerates mold, mildew, and roof degradation. It is not a fully waterproof cover; it is a breathable, water-repellent cover designed to manage moisture rather than trap it.

Ripstop Fabric Construction

Extra-strength ripstop weave resists tearing and holds up against wind stress. Water-repellent finish sheds rain and dries quickly to prevent mildew.

Integrated Air Vent System

Built-in vents reduce wind lofting and allow interior moisture to escape, protecting walls, ceiling, and slide seals from prolonged humidity damage.

Zippered Access Panels

Strategically placed zippered panels provide access to RV entry doors and exterior storage compartments without removing the entire cover.

No-Crawl Strap System

Integrated strap attachment points and a weighted toss bag let you run tension straps under the trailer without lying on the ground.

Custom Fit Design

Adjustable tension panels at the front and rear, combined with elasticized hem corners, pull the cover snug against the trailer body to eliminate flapping and reduce wind wear. This tension system also prevents pooling on the roof during rain. The cover is sized at 330 inches long, 104 inches high, and 102 inches wide -- purpose-built for the 24 ft to 27 ft travel trailer class.

Long Zipper Pulls -- Extended zipper pulls allow you to open and close the access panels from ground level in most cases, reducing the need to climb a ladder just to zip and unzip the cover panels.

Installation and Storage

The cover ships with a zippered storage bag that expands for easier repacking. Getting a cover this size back into its bag is a common frustration -- the gusseted design helps. The weighted toss bag included in the strap system lets you throw the strap tie under the trailer frame without a helper.

Recommended Use: This cover is rated for dust, dirt, scratches, moderate weather conditions, and UV ray exposure. It is not designed as a primary defense against hurricane-force winds, heavy ice loading, or prolonged standing water. Use with a ladder standoff pad if your trailer has roof-mounted antennas or A/C units to prevent fabric abrasion.

Protection Against UV and Sun Damage

UV degradation is one of the fastest ways to age a travel trailer -- fading decals, cracking sealant, and brittle rubber roof material are all accelerated by sun exposure. The PermaPRO fabric includes UV inhibitors to slow this process during storage periods. For trailers stored in high-UV climates (Southwest, high altitude), this cover provides meaningful protection between trips or during off-season storage.

Maintenance Tip: Before installing the cover, clean the trailer roof and sides to remove dirt and debris that can cause abrasion against the cover fabric over time. Re-treat the cover with a water repellent spray annually to maintain water-shedding performance, especially after washing.
Also Available: Classic Accessories PermaPRO covers are available in multiple models to fit different trailer lengths. Verify your trailer's actual length (tongue to rear bumper) before ordering -- a 24 ft travel trailer floor plan may measure longer overall. Model 4 is sized for trailers measuring 24 ft to 27 ft overall.

Cover Dimensions

Covered Length330 inches (27.5 ft)
Cover Height104 inches
Cover Width102 inches
Fits Trailer Length24 ft to 27 ft travel trailers

Product Specifications

Part Number01-0273
UPC052963008234
ManufacturerClassic Accessories
ModelPermaPRO Model 4
Cover Weight22.4 lbs
WarrantyLimited lifetime manufacturer warranty

Materials and Construction

Fabric TypePermaPRO ripstop -- lightweight, quick-drying, water-repellent
Water ResistanceWater-repellent (breathable, not waterproof)
UV ProtectionYes -- UV inhibitors integrated into fabric
Hem CornersElasticized for snug fit
Zipper PullsExtended long-pull design for ground-level access

Included in the Box

Cover1x PermaPRO travel trailer cover
Storage Bag1x expandable zippered storage bag
Strap SystemIntegrated strap attachment points with weighted toss bag

Protection Ratings

Dust and DirtYes
ScratchesYes
UV / SunYes
Moderate WeatherYes
Fully WaterproofNo -- breathable water-repellent design
Important Information
  • This cover fits travel trailers measuring 24 ft to 27 ft overall (tongue to bumper). Measure your trailer before ordering -- floor plan length and overall length differ.
  • This is a breathable, water-repellent cover -- it is NOT a fully waterproof cover. It is designed to manage and vent moisture, not seal the trailer from all water entry.
  • Not rated for heavy ice loads, extreme wind events, or long-term snow accumulation. Remove or reinforce as needed in severe winter storage conditions.
  • Inspect roof-mounted accessories (A/C units, antennas, vents) before installing. Use foam standoff pads or similar protection to prevent cover abrasion against sharp edges.
  • Do not install over a wet or dirty trailer surface. Trapped debris between cover and trailer finish can cause scratches over time.
  • Tension straps should be snug but not over-tightened -- excessive strap tension can stress the cover fabric and the trailer's drip rail or trim.


Browse for more RV Accessories in the same category as this item:

Covers > Travel Trailer Covers
Covers