Keep your folding pop-up camper protected during storage with the Classic Accessories PolyPRO3 Cover, Model 2. Built specifically for folding pop-up campers in the 10-12 ft length class, this three-layer cover guards against UV rays, bird droppings, dust, dirt, and moderate weather -- so your camper is ready to go when the season opens back up.
Unlike generic tarp covers or one-size fits-all solutions, the PolyPRO3 Model 2 is engineered around the profile of folding pop-up campers. The cover accounts for the low, boxy shape of a folded-down pop-up -- 156 inches long, 88 inches wide, and 42 inches high -- with front and rear tension panels and elasticized hem corners that pull the cover snug without bunching or billowing.
The three-layer PolyPRO3 fabric is the core of this cover's protection. An outer layer repels moisture and resists UV degradation, a middle layer provides structural padding, and a soft inner liner protects painted and finished surfaces from scratching during the storage season.
Built-in vents reduce wind stress by allowing air to pass through, and help evacuate interior moisture that would otherwise promote mildew growth under the cover.
An integrated rope attachment system with an included toss bag lets you thread the securing rope under the camper without crawling on the ground -- a real benefit on cold or wet days.
Adjustable front and rear tension panels combined with elasticized hem corners conform the cover to your specific camper profile, keeping it in place in wind without over-tightening.
Every PolyPRO3 cover ships with a stuff sack for compact storage when the cover is off the camper. No hunting for a bag or folding into a box -- just stuff and stow.
This cover is rated for moderate weather protection. It handles the day-to-day storage threats well: UV radiation that degrades vinyl and fades finishes, bird droppings and tree sap that etch surfaces, dust and pollen accumulation, and light to moderate rain and snow loading.
The PolyPRO3 is designed for year-round storage. The quick-drying polypropylene side panels shed moisture after rain events, and the vent system helps prevent condensation buildup during temperature swings -- a common issue in off-season storage.
This is the Model 2 cover, sized for pop-up campers measuring 10 to 12 feet in length when folded down. Cover dimensions are 156 inches (L) x 88 inches (W) x 42 inches (H). Measure your folded camper before ordering -- Classic Accessories offers additional model sizes for shorter and longer campers. This cover is designed exclusively for folding pop-up campers and is not intended for travel trailers, fifth wheels, or hard-side campers.
The PolyPRO3 name refers to the three-layer polypropylene composite fabric used throughout the top panel and main body of the cover. Polypropylene is lightweight, quick-drying, and inherently resistant to mildew. The quick-dry PolyPRO sides allow moisture to escape rather than trap it. The soft inner liner layer contacts the camper surface directly, protecting the finish from abrasion during wind movement.
The PolyPRO3 series sits in the mid-tier of the Classic Accessories camper cover lineup -- above the basic PolyPRO1 single-layer covers and below the top-tier Overdrive and StormPro lines. If you store your pop-up in a region with heavy snow loads or sustained driving rain, consider stepping up to a heavier-duty cover. For standard off-season garage or driveway storage, the PolyPRO3 is a well-balanced choice.