A direct OEM-style replacement propane supply hose for RV appliances. This 24" rubber hose connects LP supply ports using standard 3/8" female swivel SAE flare fittings on both ends -- the same connection standard used on ranges, furnaces, water heaters, and other coach-installed propane appliances. UL and CSA listed for LP gas service.
When an LP supply hose cracks, stiffens, or shows signs of wear, it needs to come out immediately. JR Products 06-0145 is purpose-built for RV propane systems -- not a generic automotive or shop hose pressed into service. The 1/4" ID rubber construction is rated for LP gas, and both ends terminate in 3/8" female swivel SAE flare fittings, which are the standard connection point for coach-installed appliances like Suburban and Atwood furnaces, water heaters, and range/oven units.
At 24" in length, this hose is long enough to reach across typical under-counter or compartment installations with some slack for vibration absorption, which matters in a vehicle that moves. The swivel ends allow tightening without twisting the hose body.
Proper bore size for LP appliance supply lines in RV installations, not undersized tubing that restricts flow to burners or pilots.
Dual swivel ends match standard OEM LP fittings on ranges, furnaces, water heaters, and other propane appliances.
Safety-listed for LP gas service -- meets the code requirements expected in RV and manufactured housing propane systems.
Provides enough hose to route cleanly through compartments with a service loop, reducing stress on fittings from road vibration.